The LXM18MPDU10N4X is listed as current/active on Schneider Electric's lifecycle record — no phase-out notice, no last-time-buy window. This is a standard-catalog servo drive, not a legacy or end-of-life line. No stock-holding claim — quoted to order.
Power stage and current capability
Rated 1.0 kW nominal output at 380-440 V three-phase input, 8 kHz switching frequency. The continuous output current is 3.5 A at 8 kHz; the 3-second peak output current is 11 A — useful for acceleration transients on a servo axis without oversizing the drive. Line draw is 2.4 A at the same voltage range. Supply voltage limits span 342-484 V three-phase, with nominal 380-440 V at -10/+10 % tolerance. Network frequency range is 47.5-63 Hz.
Control interfaces and feedback
Communication is via Modbus (RTU/ASCII) plus integrated digital and analog I/O, PTI (pulse train input) and PTO (pulse train output). This covers basic positioning over Modbus or step/direction from a PLC motion controller without an extra fieldbus card. The drive carries no internal EMC filter — an external filter is required to meet CE emission limits in a panel installation. Factor that into the panel BOM and cabinet space.
Mechanical fit and panel integration
Width is the panel-space constraint — 55 mm per axis in a multi-drive cabinet. Depth at 174 mm means standard 200 mm deep enclosures clear the drive body with room for cabling clearance at the front.