Skip to main content
Schneider Electric LXM62DC13G21000

Schneider Electric LXM62DC13G21000 PacDrive 3 Servo Drive

MPN LXM62DC13G21000
Active

Schneider Electric PacDrive 3 LXM62 single-axis servo drive, 24.7 kW continuous, 50 A continuous / 130 A 3s peak, STO SIL 3 PL e, SERCOS III, IP20, 270 x 89 x 310 mm.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LXM62DC13G21000 specifications
ParameterValue
Main product or component typeSingle axis servo drive
Frequency8 kHz
IP ratingIP20
Temp operating max55 °C
Temp operating min5 °C
Pollution degree2 conforming to IEC 61800-5-2
Depth270 mm
Width89 mm
Height310 mm
I/O channels2 digital 2 touch probe
Operating temperature-5...55 °C

Product details

The LXM62DC13G21000 is a single-axis servo drive from the PacDrive 3 family, rated 24.7 kW continuous power with a continuous output current of 50 A at 4 kHz switching frequency and a 3-second peak of 130 A at 4 kHz — that peak headroom handles the acceleration transient on a high-inertia load without oversizing the continuous rating. Physical envelope is 270 mm deep by 89 mm wide by 310 mm high, IP20 rated, so it lives inside a cabinet with forced airflow — the 5 °C to 55 °C operating ambient sets the derating floor; above 55 °C the continuous current must be reduced per the manufacturer's curve. Supply is three-phase 400 V nominal (-10 % / +10 %) or three-phase 230 V, with the 50/60 Hz tolerance held to ±5 %. Overvoltage category III means it's rated for fixed-installation mains connection without external suppression.

Safety and bus integration — STO and SERCOS III

Hardware STO (safe torque off) is implemented on this drive, certified to SIL 3 per IEC 61508 and PL e per ISO 13849-1 — the safety function removes drive torque without a main contactor, which simplifies the safety circuit in a guarding application. Integrated SERCOS III communication interface handles the real-time motion bus for multi-axis synchronization; the drive also carries 2 digital inputs, 2 touch-probe inputs, and 2 digital outputs for local I/O without an extra module. The terminal blocks accept wire from 0.2 mm² up to 16 mm² depending on the connector (CN4 through CN7), with clamping torque specified at 2.5 N·m for CN1. Pollution degree 2 per IEC 61800-5-2 means it's rated for normal factory-floor environments without conductive contamination.

Certification stack includes UL 508C, CSA C22.2 No 14, IEC 61800-5-1 (safety), IEC 61800-3 (EMC), IEC 62061, and ISO 13849-1/2 — the drive carries acceptance for North American and European machinery directives without an external filter for most industrial environments.

MPN
LXM62DC13G21000