The LXM62DC13G21000 is a single-axis servo drive from the PacDrive 3 family, rated 24.7 kW continuous power with a continuous output current of 50 A at 4 kHz switching frequency and a 3-second peak of 130 A at 4 kHz — that peak headroom handles the acceleration transient on a high-inertia load without oversizing the continuous rating. Physical envelope is 270 mm deep by 89 mm wide by 310 mm high, IP20 rated, so it lives inside a cabinet with forced airflow — the 5 °C to 55 °C operating ambient sets the derating floor; above 55 °C the continuous current must be reduced per the manufacturer's curve. Supply is three-phase 400 V nominal (-10 % / +10 %) or three-phase 230 V, with the 50/60 Hz tolerance held to ±5 %. Overvoltage category III means it's rated for fixed-installation mains connection without external suppression.
Safety and bus integration — STO and SERCOS III
Hardware STO (safe torque off) is implemented on this drive, certified to SIL 3 per IEC 61508 and PL e per ISO 13849-1 — the safety function removes drive torque without a main contactor, which simplifies the safety circuit in a guarding application. Integrated SERCOS III communication interface handles the real-time motion bus for multi-axis synchronization; the drive also carries 2 digital inputs, 2 touch-probe inputs, and 2 digital outputs for local I/O without an extra module. The terminal blocks accept wire from 0.2 mm² up to 16 mm² depending on the connector (CN4 through CN7), with clamping torque specified at 2.5 N·m for CN1. Pollution degree 2 per IEC 61800-5-2 means it's rated for normal factory-floor environments without conductive contamination.
Certification stack includes UL 508C, CSA C22.2 No 14, IEC 61800-5-1 (safety), IEC 61800-3 (EMC), IEC 62061, and ISO 13849-1/2 — the drive carries acceptance for North American and European machinery directives without an external filter for most industrial environments.