Skip to main content
Schneider Electric MH30701P01F2200

Schneider Electric MH30701P01F2200 Servo Motor with Brake

MPN MH30701P01F2200
Obsolete

Schneider Electric MH30701P01F2200 servo motor with brake, 930 W continuous power, three-phase, IP65, single-turn SinCos Hiperface encoder, 70 mm flange, smooth shaft.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

MH30701P01F2200 specifications
ParameterValue
Encoder typeSingle turn SinCos Hiperface
Shaft end typeSmooth shaft
Main product or component typeServo motor
IP ratingIP65
Length6.3 in (161 mm)
Shaft diameter0.4 in (11 mm)
Max radial force fr n660 N 1000 rpm 520 N 2000 rpm 460 N 3000 rpm 410 N 4000 rpm 380 N 5000 rpm 360 N 6000 rpm
Centring collar diameter2.4 in (60 mm)

Product details

Motor dimensions and mounting — fits the standard 70 mm flange

The MH30701P01F2200 carries a 70 mm flange (2.8 in) with a 60 mm centring collar and 5.5 mm mounting holes, so it bolts directly to any standard IEC 70 mm motor mount without an adapter plate. Overall body length is 161 mm (6.3 in) with a smooth shaft 11 mm in diameter and 23 mm of usable shaft length — enough to couple to most inline gearboxes or pulleys without shaft modification.

Continuous stall torque is 1.4 N·m (12.4 lbf·in) across the full 115–480 V three-phase range, and the holding brake locks at 3 N·m (26.6 lbf·in) — enough to hold a vertical load without a separate mechanical brake, as long as the load torque stays under that figure. Nominal speed depends on the drive supply: 1250 rpm at 115 V single-phase, 3000 rpm at 230 V, 5500 rpm at 400 V three-phase, and 7000 rpm at 480 V three-phase. The maximum mechanical speed is 8000 rpm, so the motor can overshoot briefly during a fast stop without damaging the rotor. Peak stall torque reaches 4.2 N·m (37.2 lbf·in) at any three-phase voltage — that is 3× the continuous rating, giving headroom for acceleration or short-duration overloads without tripping the drive.

Encoder and feedback — single-turn Hiperface for position loops

The single-turn SinCos Hiperface encoder provides absolute position within one revolution and analogue sine/cosine tracks for high-resolution velocity feedback.

Environmental protection and cooling — IP65 with natural convection

IP65 rating means the motor housing and shaft seal resist dust ingress and low-pressure water jets from any direction — suitable for washdown areas in food processing or for dusty packaging lines. No forced cooling fan means no fan noise and no filter to clean, but the 930 W continuous rating assumes free air around the motor; derating applies if it is boxed in. The rotatable right-angled connectors let the cable exit in any of four directions, so the motor fits tight enclosures without a hard 90° cable bend.

No official successor or cross-reference is listed, so this is the direct replacement for any existing MH3-series installation. The part number is the braked variant (MH30701P01F2200); the non-braked version uses a different order code.

MPN
MH30701P01F2200