Skip to main content
Schneider Electric MH31001P02A2200

Schneider Electric MH31001P02A2200 Servo Motor, 1.52 kW

MPN MH31001P02A2200
Active

Schneider Electric MH31001P02A2200 servo motor, three-phase, 1.52 kW continuous power, 4000 rpm nominal speed, 3.3 N.m nominal torque, IP65, Multiturn SinCos Hiperface encoder, smooth shaft.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

MH31001P02A2200 specifications
ParameterValue
Encoder typeMultiturn SinCos Hiperface
Shaft end typeSmooth shaft
Main product or component typeServo motor
IP ratingIP65
Length5.06 in (128.6 mm)
Shaft diameter0.7 in (19 mm)
Max radial force fr n900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm
Centring collar diameter3.7 in (95 mm)

Product details

Torque and speed envelope for the motion profile

The MH31001P02A2200 delivers a nominal torque of 3.3 N.m at 4000 rpm, with a continuous stall torque of 3.4 N.m across the 115...480 V three-phase range — enough to hold position at zero speed without a holding brake. Peak stall torque reaches 10.8 N.m for short bursts, so the motor can accelerate a load through a quick index without oversizing the drive. Continuous power is 1.52 kW at 480 V, and the maximum mechanical speed is 6000 rpm — the motor can run above nominal for high-speed moves if the drive and load inertia allow it.

Encoder feedback and wiring integration

The Multiturn SinCos Hiperface encoder gives absolute position over multiple revolutions — no homing sequence needed at power-up, which saves a full cycle on every restart. The rotatable right-angled connectors let you route the power and feedback cables in tight cabinet layouts without bending the cable below its minimum radius. IP65 protection means the motor body and connector interface withstand washdown — suitable for food-and-bev or machining lines where coolant spray is routine.

MPN
MH31001P02A2200