Skip to main content
Schneider Electric SH32051P01F2200

SH32051P01F2200 servo motor, 5.5 kW, 3000 rpm, IP65

MPN SH32051P01F2200
Active

SH3 series servo motor, SH32051P01F2200, 5.5 kW continuous power, 3000 rpm at 400 V three-phase, IP65, absolute single-turn SinCos Hiperface encoder, holding brake, smooth shaft, rotatable right-angled connector.

$7,000.00 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

SH32051P01F2200 specifications
ParameterValue
Shaft end typeSmooth shaft
Main product or component typeServo motor
Length14.6 in (370.5 mm)
Shaft diameter1.5 in (38 mm)
Max axial force fa n740 N
Max radial force fr n3730 N 1000 rpm 2960 N 2000 rpm 2580 N 3000 rpm
Centring collar diameter7.09 in (180 mm)

Product details

Motor ratings and voltage-dependent performance

The SH32051P01F2200 is a three-phase servo motor from the SH3 series, delivering 5.5 kW continuous power at 400 V three-phase input. Its nominal speed shifts with the supply voltage: 750 rpm on 115 V single-phase, 1500 rpm on 230 V single-phase, 3000 rpm on 400 V three-phase, and 3600 rpm on 480 V three-phase. Nominal torque also varies by voltage: 282.3 lbf·in (31.9 N·m) at 115 V single-phase, 239.0 lbf·in (27 N·m) at 230 V single-phase, 154.9 lbf·in (17.5 N·m) at 400 V three-phase, and 122.1 lbf·in (13.8 N·m) at 480 V three-phase. Peak stall torque reaches 973.6 lbf·in (110 N·m) across the 115–480 V three-phase range.

Encoder, brake, and environmental sealing

Fitted with an absolute single-turn SinCos Hiperface encoder, this motor provides position feedback without a homing cycle on power-up — critical for applications that must resume from a known position after a power loss or emergency stop. An integral holding brake delivers 708.06 lbf·in (80 N·m) of holding torque, securing the load when the drive is disabled. The motor carries IP65 protection on the housing and shaft bushing per IEC 60034-5, with IP67 on the housing — suitable for washdown environments in food processing or packaging lines. The rotatable right-angled connector allows the cable exit to be oriented to fit tight cable-tray routing, and the smooth shaft (no keyway) simplifies coupling selection for direct-drive or belt-driven loads.

MPN
SH32051P01F2200