Skip to main content
Schneider Electric TM310M45ECT26T

Schneider TM310M45ECT26T Modicon M310 Motion Controller, 24

MPN TM310M45ECT26T
Active

Schneider Electric Modicon M310 motion controller, TM310M45ECT26T, 24 discrete I/O, 0.5 ms cycle, fast I/O <2.5 µs, dual Ethernet, EtherCAT, CANopen, RS232/485, 210 x 114 x 70 mm.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

TM310M45ECT26T specifications
ParameterValue
Encoder type1 master encoder 2 incremental encoders
Main product or component typeMotion controller
IP ratingIP20
Temp storage max70 °C
Temp storage min-20 °C
Temp operating max55 °C
Temp operating min0 °C
Storage temperature-20...70 °C
Pollution degree2
Depth70 mm
Width210 mm
Height114 mm
Backup time6 years time and program saving at 25 °C
Input impedance4.3 kOhm for input
Discrete input logicSink or source (positive/negative)
Discrete output logicPositive logic (source)
Operating temperature0...55 °C (horizontal installation) 0...45 °C (vertical installation)

Product details

The TM310M45ECT26T: It reads incremental encoders and a master encoder directly, and communicates over dual gigabit Ethernet ports, EtherCAT, CANopen master, Modbus TCP, Ethernet/IP, OPC UA, and RS232/485. Built-in 2 GB program RAM and 16 GB flash for data logging or recipe storage – the real-time clock holds the time for 6 years at 25 °C. All this draws 20 W from a 24 V DC supply.

The controller measures 210 x 114 x 70 mm and mounts on TH35-15 DIN rail or panel. Vibration resistance: 1 gn above 8.4 Hz on DIN rail, shock 15 gn for 11 ms; humidity 5–95% non-condensing, pollution degree 2.

I/O and field wiring

Inputs are sink or source (24 V DC, 5.2 mA per fast input), compliant with IEC 61131-2 Type 1. Outputs are source transistor, short-circuit and automatic overload protected, with reverse polarity protection on the supply. Insulation between fast input and internal logic is 550 V AC; between fast output and logic is 500 V AC; but inputs are non-insulated from each other. Surge withstand 0.5 kV common and differential mode on the DC power lines per IEC 61000-4-5. The removable terminal block arrangement keeps the encoder and serial connections separate from the main I/O – helps section the wiring.

Lifecycle and sourcing note

This part is actively produced – no end-of-life notice in the record. It's a standard catalog item (Modicon M310 range), so you can spec it into a BOM without worrying about a last-time buy. If you need to source it, quote against an RFQ for the best lead time.

MPN
TM310M45ECT26T