Skip to main content
Schneider Electric XCKL102

Square D XCKL102 Limit Switch, General Duty Compact, 240VAC

MPN XCKL102

Square D XCKL102, General Duty Compact limit switch, SPDT 1NO-1NC, 240VAC 3A / 250VDC 0.27A, NEMA 1/2/4/6/6P/12/13 IP66, steel roller plunger, 1/2 NPT conduit, UL/CSA.

$34.29 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

XCKL102 specifications
ParameterValue
Product typeCOMPACT, General Duty
Operation typeSnap Action
Actuator head typeSteel Roller Plunger Head
Temp operating max158 °C
Temp operating min-13 °C
Pretravel3.1 MM
Differential travel1.5 MM

Product details

What This Switch Is Built For

The Square D XCKL102 is a general duty compact limit switch — the kind you'd find on a conveyor transfer, a machine guard door, or a packaging line where the environment gets wet or dusty. It carries a NEMA 1/2/4/6/6P/12/13 rating and IP66, meaning it's sealed against hose-down and temporary submersion (NEMA 6P). That's a switch you can mount on a washdown station or an outdoor transfer deck without worrying about the contacts corroding.

Contact rating is 240 VAC at 3 Ampere, and 250 VDC at 0.27 Ampere. That's a modest current — fine for pilot duty on a PLC input or a contactor coil, but not for switching a motor directly. The SPDT (1NO-1NC) configuration gives you both a normally-open and normally-closed set in one body, so you can wire a safety circuit NC loop and a status signal NO in the same switch without an extra block. Connection is through a 1/2-inch NPT conduit hub — standard for North American panels. No pigtail, no micro connector; you land your own 14-18 AWG inside the switch body.

The XCKL102 carries UL and CSA approval, so it's accepted across North America without a special evaluation. It also complies with EN/IEC 60204-1 (safety of machinery) and EN/IEC 60947-5-1 (control circuit devices), which covers the European machinery directive requirements for a limit switch. That makes it a drop-in for export machinery or a line built to global standards.

MPN
XCKL102