Skip to main content
Schneider Electric XS112BLPBL2

Telemecanique XS112BLPBL2 Inductive Proximity Sensor, PNP NC

MPN XS112BLPBL2

Telemecanique Sensors XS1 series inductive cylindrical proximity sensor, XS112BLPBL2, shielded M12 threaded, PNP NC, 2 mm sensing distance, 12-24V DC, IP67, prewired 2 m cable.

$9.14 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

XS112BLPBL2 specifications
ParameterValue
SeriesXS1
Output circuit typePNP
Supply voltageNot Rated ; 12-24 V DC
IP ratingIP67
Body finishNickel Plated
Sensor diameter12 mm
Sensor body styleCylindrical

Product details

The XS112BLPBL2 is a shielded M12 threaded inductive proximity sensor from the Telemecanique XS1 series. It detects ferrous targets at 2 mm, switching a PNP normally-closed output at 12-24V DC up to 200 mA. The brass barrel, nickel-plated body and IP67 / NEMA 4X rating make it suitable for washdown or oily environments on machine tools, conveyors, and packaging lines.

The 2 mm shielded sensing face means the sensor detects only when the target is within that gap — flush mounting in steel is fine, but the effective range drops to roughly 70% in a steel panel. The M12 threaded barrel fits a standard 12 mm mounting hole; the 44 mm overall length leaves room in tight panels. Prewired 2 m bare-wire cable saves one junction box versus a connector variant, but the 3-wire PNP NC output means the load sees +24V when the target is absent — verify your PLC input card sinks PNP signals. The 200 mA load current covers most PLC digital inputs and small relays directly. Supply voltage tolerance 12-24V DC means it runs on a 24V nominal bus without a regulator, but check your ripple — inductive sensors can misbehave below 10V at the terminals.

MPN
XS112BLPBL2