Skip to main content
Schneider Electric A9C15032

Schneider Electric A9C15032 Acti9 iTL+ Impulse Relay, 16 A,

MPN A9C15032
Active

Schneider Electric Acti9 iTL+ impulse relay, A9C15032, 1P+N, 16 A rated current, 230 V AC control, clip-on DIN rail mount.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9C15032 specifications
ParameterValue
Control typeRemote and manual control
Control signal typeImpulse
Main product or component typeImpulse relay
Voltage230 V AC 50 Hz
Coil voltage230 V AC 50 Hz
Frequency6 switching operation/minute
Poles1
Temp storage max60 °C
Temp storage min-40 °C
Temp operating max55 °C
Temp operating min-5 °C
Storage temperature-40...60 °C
Depth60 mm
Width18 mm
Height84 mm
Electrical life cyclesAC-21: 5000000 cycles AC-22: 5000000 cycles
ApplicationStandard
Operating temperature-5...55 °C

Product details

The control circuit runs on 230 V AC at 50 Hz, drawing 11 VA inrush and holding at 1.1 VA. The relay is rated for 5 million cycles under AC-21 and AC-22 duty (resistive and mixed resistive-inductive loads), so it's a fit for frequent switching applications like corridor or stairwell lighting where you want the contactor to stay latched without coil power draw between pulses.

Neutral is on the left. Terminals accept up to 4 mm² rigid or 2.5 mm² flexible cable, with a tunnel-type connection top and bottom. Strip length is 10 mm; tighten to 1 N·m. IP20 on the opening (finger-safe when wired), IP40 inside an enclosure. The tropicalisation treatment (class 2 per IEC 60068-1) handles humidity up to 95% at 55 °C, so it's fine for non-condensing environments like plant floors or enclosed switchboards.

MPN
A9C15032