Skip to main content
Schneider Electric A9C15186

Schneider Electric A9C15186 Acti9 CT Contactor, 2P, 25 A, 23

MPN A9C15186
Obsolete

Schneider Electric Acti9 CT contactor, A9C15186, 2P, 25 A AC-7A, 230 V AC 50 Hz control, clip-on 35 mm DIN rail, IP20.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9C15186 key specifications
ParameterValue
Control typeRemote and manual control
Control signal typeMaintained
Main product or component typeContactor
Voltage250 V AC 50 Hz
Coil voltage230 V AC 50 Hz
Insulation voltage ui500 V AC
Current25 A AC-7 A 8.5 A AC-7B
Frequency100 switching operations/day
Poles2P
Utilization categoryAC-1 conforming to IEC 60947-4
Temp storage max60 °C
Temp storage min-40 °C

All specifications

A9C15186 additional specifications
ParameterValue
Temp operating max60 °C
Temp operating min-5 °C
Storage temperature-40...60 °C
Pollution degree2
ColorWhite
Depth66 mm
Width18 mm
Height90 mm
ApplicationControl circuit
Operating temperature-5...60 °C

Product details

Rated operational current is 25 A in AC-7A category (general-use resistive and inductive loads up to 250 V AC) and 8.5 A in AC-7B category (motor loads). The control coil is 230 V AC at 50 Hz, drawing 15 VA inrush and 3.8 VA hold-in. That means the coil's steady-state draw is low enough to daisy-chain multiple contactors on a single PLC output without exceeding the output's current rating. The contactor is certified to IEC 61095 and EN 61095 — the standards for electromechanical contactors for household and similar purposes — and carries an AC-1 utilisation category per IEC 60947-4 for non-inductive or slightly inductive loads.

Integration notes

The 18 mm width means it takes one standard modular pitch. Terminals are tunnel type: power circuit accepts up to 2 x 2.5 mm² flexible or 1 x 6 mm² rigid; control circuit accepts 2 x 2.5 mm² flexible or 2 x 1.5 mm² rigid. Wire stripping length is 10 mm; tightening torque is 0.8 N·m. IP20 body protection (IP40 in modular enclosure) means it is suited for dry indoor panels only — not for washdown or outdoor locations. The contactor is remotely and manually controlled with a maintained control signal. Local signalling is via a colour indicator. Switching frequency is rated at 100 operations per day — fine for on/off control of lighting, HVAC contactors, or small motor starters, but not for high-cycling applications like rapid conveyor indexing.

MPN
A9C15186