Skip to main content
Schneider Electric A9C21162

Schneider Electric A9C21162 Acti9 iCT Contactor, 2P, 63 A AC

MPN A9C21162
Active

Schneider Electric Acti9 iCT contactor, A9C21162, 2P, 63 A AC-7A / 20 A AC-7B, 24 V AC 50 Hz coil, clip-on 35 mm DIN rail, IP20, IEC/EN 61095.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9C21162 key specifications
ParameterValue
Control typeRemote and manual control
Control signal typeMaintained
Main product or component typeContactor
Voltage250 V AC 50 Hz
Coil voltage24 V AC 50 Hz
Insulation voltage ui500 V AC 50/60 Hz
Current63 A AC-7 A 20 A AC-7B
Frequency100 switching operations/day
Poles2P
Temp storage max70 °C
Temp storage min-40 °C
Temp operating max60 °C

All specifications

A9C21162 additional specifications
ParameterValue
Temp operating min-5 °C
Storage temperature-40...70 °C
Pollution degree2
ColorWhite
Depth73.5 mm
Width36 mm
Height85 mm
Mechanical life cycles1000000 cycles
ApplicationMotor-heating-lighting
Operating temperature-5...60 °C

Product details

The Schneider Electric A9C21162 is a 2-pole contactor from the Acti9 iCT range, rated for motor, heating, and lighting loads on 250 V AC 50 Hz networks. It carries a 63 A rated operational current in AC-7A duty (resistive/motor loads with low inrush) and 20 A in AC-7B (motor loads with higher inrush), per IEC/EN 61095. The coil pulls 24 V AC at 50 Hz, with an inrush of 34 VA and a holding power of 1.6 W.

The AC-7A rating of 63 A is the one that governs most resistive and lightly inductive loads — think resistive heating banks or fan coils. If you are switching a motor, the 20 A AC-7B figure is the binding limit, not the 63 A headline. Electrical durability is 100,000 cycles at 63 A AC-7A, and 30,000 cycles at 20 A AC-7B — so the heavier the motor load, the shorter the contact life; plan spares accordingly.

The 2-pole footprint is 36 mm wide (2 modular pitches of 18 mm), which keeps panel density reasonable. Tightening torque is 0.8 N·m on the control circuit and 3.5 N·m on the power circuit.

MPN
A9C21162