Skip to main content
Schneider Electric A9C40225

Schneider Electric A9C40225 Acti9 iCTK Contactor, 2P, 25 A A

MPN A9C40225
Active

Schneider Electric Acti9 iCTK contactor, 2P, 25 A AC-7A, 230-240 V AC 50 Hz, clip-on 35 mm DIN rail, IP20.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9C40225 key specifications
ParameterValue
Control typeRemote control
Control signal typeMaintained
Main product or component typeContactor
Voltage250 V AC 50 Hz
Coil voltage230...240 V AC 50 Hz
Insulation voltage ui500 V AC 50 Hz
Current25 A AC-7 A 8.5 A AC-7B
Frequency100 switching operations/day
Poles2P
Temp storage max70 °C
Temp storage min-40 °C
Temp operating max60 °C

All specifications

A9C40225 additional specifications
ParameterValue
Temp operating min-5 °C
Storage temperature-40...70 °C
Pollution degree2
ColorWhite
Depth68.5 mm
Width18 mm
Height81 mm
Electrical life cycles80000 cycles IEC/EN 61095 25 A 50 Hz AC-7 A 25000 cycles IEC/EN 61095 8.5 A 50 Hz AC-7B 30000 cycles IEC/EN 61095 50 Hz AC-7C 80000 cycles EN/IEC 60947-4-1 50 Hz AC-1 30000 cycles EN/IEC 60947-4-1 50 Hz AC-3 30000 cycles EN/IEC 60947-4-1 50 Hz AC-5 a 30000 cycles EN/IEC 60947-4-1 50 Hz AC-5b
Mechanical life cycles1000000 cycles
ApplicationMotor-heating-lighting
Operating temperature-5...60 °C

Product details

The Schneider Electric A9C40225 is a 2-pole contactor from the Acti9 iCTK series, rated for 25 A in AC-7A duty and 8.5 A in AC-7B at 250 V AC, 50 Hz. It is designed for residential and small commercial lighting, motor, and heating loads, switching up to 1.2 W at 250 V AC. The control coil accepts 230-240 V AC 50 Hz, maintained signal type. Rated operational current of 25 A in AC-7A covers resistive and lightly inductive loads like resistive heating or incandescent lighting; the 8.5 A AC-7B rating applies to motor loads such as small pumps or fans. The 2 NO pole contact composition means both poles close on coil energization — no normally-closed auxiliary on this base unit.

Depth is 68.5 mm, height 81 mm. IP20 finger-safe enclosure; IP40 when installed in a modular enclosure. Tunnel-type terminals accept up to 6 mm² rigid on the power circuit, 2.5 mm² on the control circuit. Tightening torque is 0.8 N.m for both power and control terminals.

Durability and lifecycle

Electrical durability varies by duty: 80,000 cycles at 25 A AC-7A, 25,000 cycles at 8.5 A AC-7B, and 30,000 cycles under AC-3 motor switching per IEC 60947-4-1. Mechanical durability is 1,000,000 cycles.

Designed to IEC/EN 61095 (household and similar electromechanical contactors) and EN/IEC 60947-4-1 (low-voltage switchgear for motor starting).

MPN
A9C40225