Skip to main content
Schneider Electric A9C52410

A9C52410 Reflex iC60N 10 A 4P curve C integrated control MCB

MPN A9C52410
Obsolete

Schneider Electric Acti9 Reflex iC60N integrated control circuit breaker, A9C52410, 10 A, 4P, curve C, 20 kA Icu at 230 V AC.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9C52410 specifications
ParameterValue
Trip unit typeThermal-magnetic
Control signal typeMaintained Impulse
Main product or component typeIntegrated control circuit breaker
Coil voltage230 V AC 50/60 Hz 24 V AC 50/60 Hz 48 V AC 50/60 Hz 24 V DC 48 V DC
Insulation voltage ui500 V AC
Breaking capacity20 kA Icu at 220...240 V AC 50/60 Hz conforming to EN/IEC 60947-2 10 kA Icu at 380...415 V AC 50/60 Hz conforming to EN/IEC 60947-2
IP ratingIP20
Pollution degree3
ColorWhite
Depth77 mm
Width117 mm
Height84 mm
Electrical life cyclesAC-1: 50000 cycles AC 50 Hz
Mechanical life cycles50000 cycles
ApplicationDistribution Control

Product details

The Schneider Electric A9C52410 is a Reflex iC60N integrated control circuit breaker from the Acti9 range — a 4-pole, 10 A, curve C thermal-magnetic MCB with a built-in remote control function. It combines overcurrent protection with the ability to switch the load on and off via a maintained or impulse control signal (230 V AC, 24 V AC, 48 V AC, 24 V DC, or 48 V DC control voltage options). This means a single DIN-rail device replaces a separate contactor and MCB in distribution and control panels, saving enclosure space and wiring.

Breaking capacity is 20 kA Icu at 230 V AC and 10 kA Icu at 415 V AC per EN/IEC 60947-2; that means it safely interrupts faults up to those levels without upstream fuses needing to clear first, which simplifies selectivity coordination in a 230/400 V panel. The 4 protected poles (4P) switch all live conductors, suitable for TN or IT systems where full isolation is required. Dimensions are 117 mm wide (13 x 9 mm pitches), 84 mm high, 77 mm deep — plan for 13 module widths in your enclosure layout.

Control and signalling

The integrated control accepts both maintained (continuous ON/OFF button) and impulse (pulse) commands, giving flexibility for local pushbutton or remote PLC control. A green LED indicates device ON, a flashing LED shows device ready, red LED signals fault, and flashing red indicates tripped or overheat — so you get status at a glance without a separate indicator module. Contact position indicator confirms the main contacts are open. Earth-leakage protection requires a separate Vigi block — not integrated, so plan for an additional module if RCD protection is needed.

MPN
A9C52410