Skip to main content
Schneider Electric A9L16568

Schneider Electric A9L16568 Acti9 iPRD40 Surge Arrester, 3P,

MPN A9L16568
Obsolete

Schneider Electric Acti9 iPRD40, Type 2 surge arrester, 3-pole, 340 V L/PE, 40 kA Imax, pluggable cartridge, clip-on DIN rail.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9L16568 specifications
ParameterValue
Voltage400 V AC (+/- 10 %) at 50/60 Hz
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min-25 °C
Storage temperature-40...85 °C
ColorWhite (RAL 9003)
Depth69 mm
Width54 mm
Height81 mm
ApplicationDistribution
Operating temperature-25...60 °C

Product details

The Schneider Electric A9L16568 is an Acti9 iPRD40 Type 2 surge arrester — a 3-pole MOV-based unit rated for 340 V L/PE continuous operation on TN-C earthing systems. It delivers a nominal discharge current of 15 kA per mode and a maximum discharge current of 40 kA common mode (L/PE), with a voltage protection level below 1.4 kV. This is the pluggable-cartridge variant, meaning the MOV module can be swapped without disturbing the wiring base.

Type 2 classification per EN 61643-11 and IEC 61643-11 means this arrester is designed for the main distribution board — it handles induced surge currents from switching and indirect lightning strikes, not direct-strike energy. The 340 V L/PE maximum continuous operating voltage (Uc) matches a 400 V AC (+/-10%) network with a solidly grounded neutral (TN-C system). The associated circuit breaker requirement is explicit: an IC60N, iC60H, or iC60L at 40 A curve C, with Icu ratings of 10 kA, 15 kA, or 25 kA respectively. That breaker provides the back-up overcurrent protection the arrester needs to safely clear a fault.

Panel Integration

Clip-on mounting to DIN rail, 6 modules wide at 9 mm pitch (54 mm total). Tunnel-type terminals accept 2.5 to 35 mm² on both top and bottom, with a tightening torque of 2.5 N.m. The white (RAL 9003) housing carries an IK03 impact rating per IEC 62262. Operating temperature range is -25 to 60 °C, storage -40 to 85 °C, with relative humidity 5 to 90%. No remote signalling contacts on this variant.

MPN
A9L16568