Skip to main content
Schneider Electric A9N18556

Schneider Electric A9N18556 Vigi C120 Add-on RCD, 2P 125A 30

MPN A9N18556
Active

Schneider Electric Acti9 Vigi C120 add-on residual current device, A9N18556, 2P, 125 A, 300 mA, Type A-SI, clip-on 35 mm DIN rail.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9N18556 specifications
ParameterValue
Main product or component typeAdd-on residual current device
Voltage230...415 V AC 50 Hz
Insulation voltage ui500 V AC 50/60 Hz conforming to IEC 60947-1
IP ratingIP20
Temp storage max60 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min-25 °C
Storage temperature-40...60 °C
Pollution degree3 conforming to IEC 60947-2
ColorWhite
Depth73 mm
Width117 mm
Height95 mm
Mechanical life cycles20000 cycles
Operating temperature-25...60 °C

Product details

Rated at 125 A (In) on a 230…415 V AC 50 Hz network, it provides 300 mA earth-leakage sensitivity with a selective (time-delayed) trip characteristic, so it coordinates downstream without nuisance tripping on transient leakage. The Type A-SI (Super Immunised) classification means it handles pulsed DC fault currents from electronics (rectifiers, VFDs, UPS) while resisting nuisance tripping from high-frequency leakage — a common need on modern mixed-load panels.

Clip-on mounting to a 35 mm symmetrical DIN rail — no tools needed for installation, and the 2P (two-pole) form factor occupies 7 modules of 9 mm pitch (63 mm total width). Tunnel-type terminals accept 1…35 mm² flexible or 1…50 mm² rigid cable; tighten to 3.5 N·m with a 15 mm strip length. The IP20 finger-safe enclosure suits enclosed distribution boards — not outdoor or washdown locations.

Designed and certified to EN 61009 and IEC/EN 61009-2-1 — the harmonised standard for residual-current-operated circuit-breakers with integral overcurrent protection (RCBOs) and, for this add-on block, the applicable product-specific requirements. Rated insulation voltage (Ui) of 500 V AC 50/60 Hz per IEC 60947-1, with an operating temperature range of -25…60 °C and storage from -40…60 °C.

MPN
A9N18556