Skip to main content
Schneider Electric ATH630U55N4Z

Schneider ATH630U55N4Z Altivar HVAC Drive, 5.5 kW, 7.5 hp

MPN ATH630U55N4Z
Active

Schneider Electric Altivar HVAC ATH600 series, ATH630U55N4Z, 5.5 kW / 7.5 hp normal duty, 380-480 V, IP20, cabinet mount, integrated C2 EMC filter.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATH630U55N4Z specifications
ParameterValue
Connector typeRJ45 and open style terminals
Main product or component typeVariable speed drive
Frequency50...60 Hz - 5...5 %
IP ratingIP20
Temp storage max70 °C
Temp storage min-40 °C
Temp operating max60 °C
Temp operating min-15 °C
Storage temperature-40...70 °C
Pollution degree2
Depth166 mm
Width145 mm
Height197 mm
Operating positionVertical position

Product details

The Schneider ATH630U55N4Z is an Altivar HVAC ATH600 drive sized for a 5.5 kW (7.5 hp) motor at normal duty on 380-480 V three-phase supply. Heavy-duty rating steps down to 4 kW (5 hp), so if your application cycles hard or runs a constant-torque load like a screw compressor, spec the heavy-duty line current — 7 A at 380 V — rather than the normal-duty 9.331 A figure. Integrated Class C2 EMC filter covers conducted emissions for most European panel builds; no external filter needed for standard EN/IEC 61800-3 environments.

Cabinet mount, vertical position only. Control wiring lands on open-style terminals; fieldbus connection is RJ45 for Modbus RTU or BACnet MS/TP on the 2-wire RS-485 physical layer. The relay outputs (three form-C sets) are good for 100,000 cycles each — fine for damper or valve end-switch feedback, but not for high-cycle pilot duty.

Built-in functions

The drive includes fire mode, forced fire mode, PID controller with three additional PID sets, damper control, underload detection for broken belt, scroll compressor management, skipped frequencies, catch on the fly, and cybersecure firmware update. If you are replacing an older Altivar 212 or 312, these functions cover the HVAC-specific sequences without an external controller.

MPN
ATH630U55N4Z