Skip to main content
Schneider Electric ATV1200A32006666

Schneider ATV1200A32006666 Altivar 1200, 2675 kW, 3200 kVA

MPN ATV1200A32006666
Active

Schneider Electric Altivar 1200 ATV1200A32006666 medium voltage variable speed drive, 2675 kW motor power, 3200 kVA apparent power, 36-pulse diode rectifier input, 2970-3630 V supply, floor-standing enclosure.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV1200A32006666 specifications
ParameterValue
Input type36 pulse diode rectifier bridge
Protection typeGround fault protection: drive
Coil voltage220 V
Current280 A
IP ratingIP31 / IP42 / IP41
Temp storage max60 °C
Temp storage min-10 °C
Temp operating max50 °C
Temp operating min0 °C
Storage temperature-10...60 °C
Pollution degreePollution degree 2
Depth1700 mm (high efficiency) 1700 mm (standard efficiency)
Width5170 mm (standard efficiency) 5470 mm (high efficiency)
Height2740 mm high efficiency 2740 mm standard efficiency
Operating positionVertical +/- 10 degree
Operating temperature0...40 °C 40...50 °C (with current derating of 2 % per °C)

Product details

What this 2.6 MW drive brings to a medium-voltage line

The ATV1200A32006666 is a medium-voltage variable speed drive from the Altivar 1200 series, rated for 2675 kW motor power at 3200 kVA apparent power. It is designed for asynchronous motors in heavy industrial applications — pumps, compressors, conveyors, fans — where a 36-pulse diode rectifier bridge keeps harmonic distortion low enough to skip a dedicated line-side filter. Supply voltage range is 2970-3630 V, with a line current of 280 A at full load. The 36-pulse topology means the input current waveform has 36 pulses per cycle, which reduces total harmonic distortion to levels that typically meet IEEE 519 without an external multi-pulse transformer.

Physical footprint and installation constraints

The enclosure is grey RAL 7032. Power connections use M10 bar-type screw terminals with a clamping capacity of 6 x 40 mm² for the /L2/L3 input, with entry from the bottom or top. The control supply is separate: 220 V AC at 3 kVA for the control circuits, and 380 V AC for the cooling fan, with an optional external supply for both.

Overload capacity and protection envelope

The drive supports two overload profiles. Standard overload: 1.2 In for 60 seconds or 1.5 In for 3 seconds. High overload: 1.5 In for 60 seconds or 1.85 In for 3 seconds. The high-overload profile is the one to spec for applications with heavy starting duty or cyclical peak loads — a crusher or centrifuge, for example. Ground fault protection is integrated into the drive. Dielectric strength between earth and power terminals is 20 kV AC. The drive meets EN/IEC 61800-3 for EMC (integrated filter), EN/IEC 61800-4 for adjustable speed drives, and EN/IEC 61800-5-1 for electrical safety. Pollution degree 2 per that standard means it is intended for clean, climate-controlled environments — not outdoor or dusty locations without additional enclosure protection.

Control I/O and signal interface

The drive has 4 software-configurable analog inputs accepting 0-20 mA or 4-20 mA with 24 V max and 250 Ohm impedance. One analog output is similarly configurable. Discrete inputs: 6 standard, expandable to 10. The analog and discrete I/O are isolated from the power circuits — electrical isolation between power and control is standard. Speed range is 20-100 %, suitable for variable-torque loads like centrifugal pumps and fans where the minimum speed floor is 20 %. For constant-torque loads requiring a wider speed range, the 20 % floor may be a constraint — check the load profile against the drive's torque capability at low speed. Cooling is forced convection with 43200 m³/h airflow. The noise level is 80 dB — hearing protection is needed within the equipment room.

MPN
ATV1200A32006666