Skip to main content
Schneider Electric ATV1200A33256060

Schneider ATV1200A33256060 AC Drive, 2780 kW, 2970-3630 V

MPN ATV1200A33256060
Active

Schneider Electric Altivar 1200 series, ATV1200A33256060 medium-voltage AC drive, 2780 kW, 2970-3630 V supply, 3325 kVA, 30-pulse diode rectifier, floor-standing enclosure.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV1200A33256060 specifications
ParameterValue
Input type30 pulse diode rectifier bridge
Protection typeGround fault protection: drive
Coil voltage220 V
Current320 A
IP ratingIP31 / IP42 / IP41
Temp storage max60 °C
Temp storage min-10 °C
Temp operating max50 °C
Temp operating min0 °C
Storage temperature-10...60 °C
Pollution degreePollution degree 2
Depth1700 mm (high efficiency) 1600 mm (standard efficiency)
Width5770 mm (standard efficiency) 6070 mm (high efficiency)
Height2670 mm high efficiency 2670 mm standard efficiency 2670 mm
Operating positionVertical +/- 10 degree
Operating temperature0...40 °C 40...50 °C (with current derating of 2 % per °C)

Product details

2780 kW medium-voltage drive with 30-pulse input

The ATV1200A33256060 is a Schneider Electric Altivar 1200 medium-voltage AC drive rated for 2780 kW motor power, supplied from a 2970-3630 V three-phase line. The 30-pulse diode rectifier bridge on the input stage delivers low harmonic distortion without an external filter — a key advantage for installations where IEEE 519 compliance is a requirement. Apparent power rating is 3325 kVA with a line current of 320 A. The drive handles both synchronous and asynchronous motors, with overload capability of 1.2 In for 60 s (standard overload) or 1.5 In for 60 s (high overload).

Floor-standing enclosure and cooling

The drive ships in a floor-standing enclosure with separate air flows for the transformer and power cells. Dimensions are 2670 mm high by 5770 mm wide (standard efficiency) or 6070 mm wide (high efficiency), with depth at 1700 mm (high efficiency) or 1600 mm (standard efficiency). Forced convection cooling moves 29700 m³/h of air through the cabinet. The noise level at full load is 80 dB — plan for hearing protection if the drive is in a walk-in enclosure or near operator stations. The enclosure colour is grey RAL 7032. Electrical connection uses bar-type screw terminals M10, clamping capacity 6 x 40 mm², with cable entry from the bottom or top.

Control supply and I/O

External control supply is 220 V AC at 3 kVA; an optional 220 V AC/DC supply is available. The cooling fan requires a separate 380 V AC supply, also optional as an external feed. Electrical isolation between power and control circuits is standard. The drive has 4 software-configurable analogue inputs (0-20 mA / 4-20 mA, 250 Ohm impedance) and 1 analogue output of the same type. Discrete inputs are 6 standard, expandable to 10. The HMI is included as part of the product composition.

Standards, protection, and environmental limits

The drive carries CE marking and complies with EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3 (EMC), EN/IEC 61800-4, and EN/IEC 61800-5-1 (safety). Pollution degree is 2 per the safety standard, overvoltage category II. Integrated ground fault protection protects the drive. Dielectric strength is 20 kV AC between earth and power terminals. Prospective short-circuit current rating is 31.5 kA for 150 ms. Operating altitude range is 1000-2000 m with current derating of 0.6% per 100 m above 1000 m. Relative humidity is 0-90% standard, 0-95% optional. Operating position is vertical ±10 degrees. Vibration resistance is 4.9 m/s² at 10-50 Hz.

MPN
ATV1200A33256060