Skip to main content
Schneider Electric ATV1200A47706363

Schneider Electric ATV1200A47706363 AC Drive, 3737 kW

MPN ATV1200A47706363
Active

Schneider Electric Altivar 1200 series, ATV1200A47706363 AC drive, 3737 kW motor power, 4470 kVA apparent power, 2970-3630 V supply, 36-pulse diode rectifier, floor-standing enclosure.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV1200A47706363 specifications
ParameterValue
Input type36 pulse diode rectifier bridge
Protection typeGround fault protection: drive
Coil voltage220 V
Current410 A
IP ratingIP42 / IP31 / IP41
Temp storage max60 °C
Temp storage min-10 °C
Temp operating max50 °C
Temp operating min0 °C
Storage temperature-10...60 °C
Pollution degreePollution degree 2
Depth1700 mm (standard efficiency) 1800 mm (high efficiency)
Width6670 mm (standard efficiency) 6970 mm (high efficiency)
Height2740 mm high efficiency 2740 mm standard efficiency
Operating positionVertical +/- 10 degree
Operating temperature0...40 °C 40...50 °C (with current derating of 2 % per °C)

Product details

Cabinet dimensions and site planning

The ATV1200A47706363 ships in a floor-standing enclosure with separate air flows. Standard-efficiency units measure 1700 mm deep by 6670 mm wide by 2740 mm high; high-efficiency variants add 100 mm in depth and 300 mm in width. Forced convection cooling moves 49,800 m³/h of air through the cabinet. The 80 dB noise level means hearing protection is required near the drive during operation.

Power section and overload capability

Rated for 3737 kW motor power with 4470 kVA apparent power and 410 A line current. The 36-pulse diode rectifier bridge on the input side reduces line harmonics compared to a 6- or 12-pulse topology. Overload withstand is 1.2× In for 60 s and 1.5× In for 3 s under standard duty; high-overload mode pushes to 1.5× In for 60 s and 1.85× In for 3 s. This covers both normal starting profiles and short-duration peak loads.

Input voltage and supply requirements

Supply voltage limits are 2970 to 3630 V AC. The drive requires an external 220 V AC, 3 kVA control supply and an internal 380 V AC fan supply; both can be sourced externally if needed. Prospective line short-circuit current is 31.5 kA for 150 ms. The main power connection uses M10 screw-type terminals accepting up to 6 × 40 mm² cable per phase, entry from bottom or top.

I/O complement and control integration

Four software-configurable analogue inputs (0–20 mA / 4–20 mA, 24 V max, 250 Ω impedance) and two analogue outputs of the same type. Discrete inputs number six standard, expandable to ten via an option. Electrical isolation between power and control circuits. The drive supports both asynchronous and synchronous motors, with a speed range of 20 to 100 %.

Environmental limits and installation conditions

Operating altitude from 1000 to 2000 m requires current derating of 0.6 % per 100 m above 1000 m. Relative humidity range is 0–90 % standard, 0–95 % optional. Vibration resistance is 4.9 m/s² at 10–50 Hz. Pollution degree 2 per EN/IEC 61800-5-1, overvoltage category II. The drive must be installed vertically within ±10°.

Listed as current production. CE marked, compliant with EN/IEC 60204-11, EN/IEC 60529, EN/IEC 61800-3, EN/IEC 61800-4, and EN/IEC 61800-5-1. Integrated EMC filter is standard. The drive contains a phase-shifting transformer, medium-voltage arrestors, cooling fans, an HMI, and 18 power cells. Ground fault protection is built in.

MPN
ATV1200A47706363