Skip to main content
Schneider Electric ATV1200A85506363

Schneider Electric ATV1200A85506363 Altivar 1200 VFD

MPN ATV1200A85506363
Active

Schneider Electric Altivar 1200 ATV1200A85506363, medium-voltage AC drive, 6571 kW motor power, 7860 kVA apparent power, 36-pulse diode rectifier, 2970–3630 V supply, floor-standing enclosure.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV1200A85506363 specifications
ParameterValue
Input type36 pulse diode rectifier bridge
Protection typeGround fault protection: drive
Coil voltage220 V
Current720 A
IP ratingIP41 / IP42 / IP31
Temp storage max60 °C
Temp storage min-10 °C
Temp operating max50 °C
Temp operating min0 °C
Storage temperature-10...60 °C
Pollution degreePollution degree 2
Depth1700 mm (standard efficiency)
Width9770 mm (standard efficiency)
Height3040 mm standard efficiency
Operating positionVertical +/- 10 degree
Operating temperature0...40 °C 40...50 °C (with current derating of 2 % per °C)

Product details

Physical scale and installation footprint

The ATV1200A85506363: The enclosure has separate air flows for the power section and control compartment, with forced convection cooling moving 100,000 m³/h of air. The operating position is vertical ±10 degrees. Ambient conditions: 0–90 % relative humidity (0–95 % optional), altitude up to 2000 m with 0.6 % derating per 100 m above 1000 m.

Power rating and motor duty

Rated for 6571 kW motor power at 7860 kVA apparent power, drawing 720 A line current from a 2970–3630 V supply. The output voltage is equal to or less than the supply voltage. This drive is intended for large asynchronous motors — think induced-draft fans, boiler feed pumps, or mainline conveyor drives in heavy industry. Overload capability is defined in four tiers: 1.2× rated current (In) for 60 s standard duty, 1.5× In for 3 s standard, 1.5× In for 60 s high overload, and 1.85× In for 3 s high overload. The standard overload profile suits variable-torque loads like centrifugal pumps and fans; the high overload profile covers constant-torque loads such as conveyors or extruders that need higher starting torque.

Input topology and harmonic mitigation

The 36-pulse diode rectifier bridge input inherently cancels the 5th, 7th, 11th, 13th, 17th, and 19th harmonics, keeping total harmonic current distortion (THID) below 5 % at full load without external filters. This meets IEEE 519 requirements for the point of common coupling without additional line reactors or active filters — a significant advantage for installations where utility-imposed harmonic limits are tight. The integrated EMC filter and electrical isolation between power and control circuits further simplify compliance with EN/IEC 61800-3 (emission and immunity for adjustable-speed drives) and EN/IEC 61800-5-1 (safety requirements). The drive carries CE marking.

Protection, isolation, and fault handling

Ground fault protection is integral to the drive. Dielectric strength is 20 kV AC between earth and power terminals. The drive is rated for overvoltage category II per EN/IEC 61800-5-1 and pollution degree 2. Prospective short-circuit current withstand is 31.5 kA for 150 ms — this sets the minimum SCCR for the upstream protective device. Vibration resistance is 4.9 m/s² over 10–50 Hz. Noise level is 80 dB — hearing protection is required within the enclosure vicinity during operation.

Control interface and I/O complement

Four software-configurable analogue inputs accept 0–20 mA or 4–20 mA current signals, 24 V max, 250 Ω impedance. Two analogue outputs are similarly configurable for 0–20 mA or 4–20 mA DC. Six discrete inputs are standard, expandable to ten. The external control supply is 220 V AC, 3 kVA, with an optional 220 V AC/DC supply. Cooling fans draw 380 V AC from an internal supply.

MPN
ATV1200A85506363