Skip to main content
Schneider Electric ATV32HU40N4158

Schneider ATV32HU40N4158 Altivar 32 Drive, 4 kW, 5 hp, 380-4

MPN ATV32HU40N4158
Obsolete

Schneider Electric Altivar 32, ATV32HU40N4158, variable speed drive, 4 kW / 5 hp at 380-480 V, integrated Class C2 EMC filter, 245 x 60 x 325 mm.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ATV32HU40N4158 specifications
ParameterValue
Connector type1 RJ45 (on front face) for Modbus/CANopen
Main product or component typeVariable speed drive
Current10.5 A for 500 V 3 phases 4 kW / 5 hp 13.7 A for 380 V 3 phases 4 kW / 5 hp
Horsepower5 hp at 380...480 V
Frequency50...60 Hz - 5...5 %
IP ratingIP20
Temp storage max70 °C
Temp storage min-25 °C
Temp operating max60 °C
Temp operating min-10 °C
Storage temperature-25...70 °C
Pollution degreePollution degree 2
Depth245 mm
Width60 mm
Height325 mm
Operating positionVertical +/- 10 degree

Product details

The Schneider Electric ATV32HU40N4158 is an Altivar 32 variable speed drive rated for 4 kW / 5 hp at 380-480 V three-phase. It carries an integrated Class C2 EMC filter, which covers both environment 1 and environment 2 per EN 61800-3, so it meets the conducted emission limits for most industrial and light commercial installations without an external filter.

Output frequency range is 0.0005 to 0.599 kHz. The drive includes an adjustable PID regulator for closing a loop on pressure, flow, or level without an external controller. Braking torque reaches up to 170 % with an external braking resistor, which matters for overhauling loads or fast deceleration profiles. The drive protects against input phase loss, output phase-to-earth faults, overcurrent, and motor overheating — all built in, no add-on modules needed. Communication is via the front RJ45 for Modbus and CANopen; optional plug-in cards add DeviceNet, EtherNet/IP, or Profibus DP V1. The 10.5 V DC reference supply (1 to 10 kOhm pot, <10 mA) is short-circuit protected, so wiring a speed pot is straightforward.

The drive measures 245 mm deep by 60 mm wide by 325 mm tall, with a heat-sink assembly. Control wiring torque is 0.5 N·m; power and motor terminals take 0.6–0.7 N·m.

MPN
ATV32HU40N4158