Skip to main content
Schneider Electric ENW13221

ENW13221 EasyPact NW Drawout Circuit Breaker, 1600 A, 66 kA

MPN ENW13221
Active

Schneider Electric EasyPact NW series, ENW13221, 4-pole drawout circuit breaker, 1600 A rated current, 66 kA Icu at 440 V AC, IEC 60947-2.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW13221 key specifications
ParameterValue
Main product or component typeCircuit breaker
Voltage440 V AC 50/60 Hz conforming to IEC 60947-2
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-2
Breaking capacity66 kA Icu at 220...440 V AC 50/60 Hz conforming to IEC 60947-2
Utilization categoryCategory B
IP ratingIP30
Terminal pitch70 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C
Storage temperature-40...85 °C

All specifications

ENW13221 additional specifications
ParameterValue
Pollution degreeclass 3
Depth277 mm
Width358 mm
Height322 mm
Mechanical life cycles20000 cycles (with maintenance) conforming to IEC 60947-2 10000 cycles (without maintenance) conforming to IEC 60947-2
ApplicationDistribution
Operating temperature-5...70 °C

Product details

What this breaker delivers

The ENW13221 is a 4-pole drawout circuit breaker from the EasyPact NW range, rated 1600 A at 40 °C and built to IEC 60947-2. The 55 kA Ics (service breaking capacity) tells you it can reclose after that fault and keep running, not just survive once.

Drawout mounting and panel fit

Drawout mounting means the breaker chassis stays wired to the bus; the moving portion slides out for maintenance or swap without pulling cables. The footprint is 358 mm wide × 322 mm high × 277 mm deep — sit that against your existing switchgear cubicle cutout. Rear connection with a 70 mm pitch without spreader keeps phase spacing predictable for busbar drilling. IP30 is bare-enclosure; in a typical IP54 panel the door gasket handles the rest.

MPN
ENW13221