Skip to main content
Schneider Electric ENW13274

Schneider Electric ENW13274 EasyPact NW Switch Disconnector,

MPN ENW13274
Active

Schneider Electric EasyPact NW switch disconnector, ENW13274, 800 A, 3 poles, fixed mounting, AC-23A utilisation category, IEC 60947-3.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW13274 key specifications
ParameterValue
Main product or component typeSwitch disconnector
Voltage440 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 800 A AC 50/60 Hz 440 V
Utilization categoryAC-23 A
IP ratingIP30
Terminal pitch70 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C
Storage temperature-40...85 °C

All specifications

ENW13274 additional specifications
ParameterValue
Pollution degreeclass 3
Depth196 mm
Width276 mm
Height301 mm
Mechanical life cycles20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3
ApplicationDistribution
Operating temperature-5...70 °C

Product details

Switch disconnector for distribution — 800 A, AC-23A duty

The Schneider Electric ENW13274 is a fixed-mount switch disconnector from the EasyPact NW range, rated 800 A in AC-23A utilisation category at 440 V AC 50/60 Hz. That AC-23A rating means it handles the high inrush of motor loads or mixed resistive-inductive circuits — not just passive distribution. Three poles, rear-connected, with a 70 mm connection pitch without spreader.

Rated insulation voltage (Ui) is 1000 V AC — the switchgear can live in a 690 V system without derating the insulation path. Impulse withstand (Uimp) at 12 kV covers the typical transient environment for industrial distribution. Short-time withstand (Icw) is 50 kA for 1 second at 220–440 V; that tells you the switch can ride through a fault long enough for an upstream breaker to clear, assuming the system SCCR is coordinated. Making capacity (Icm) is 75 kA at the same voltage — it can close onto a bolted fault without welding contacts.

Fixed mounting on a rail base plate. The footprint is 276 mm wide × 301 mm high × 196 mm deep — allow for rear cable access and the vertical or horizontal connection orientation. IP30 protection: fine inside a locked panel, not for washdown areas.

MPN
ENW13274