Skip to main content
Schneider Electric ENW13280

Schneider Electric ENW13280 EasyPact NW Switch Disconnector,

MPN ENW13280
Active

Schneider Electric EasyPact NW switch disconnector, 3 poles, 1000 A AC-23A, drawout mounting, 358 x 322 x 277 mm.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW13280 key specifications
ParameterValue
Main product or component typeSwitch disconnector
Voltage440 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 1000 A AC 50/60 Hz 440 V
Utilization categoryAC-23 A
IP ratingIP30
Terminal pitch70 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C
Storage temperature-40...85 °C without control unit

All specifications

ENW13280 additional specifications
ParameterValue
Pollution degreeclass 3
Depth277 mm
Width358 mm
Height322 mm
Mechanical life cycles20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3
ApplicationDistribution
Operating temperature-5...70 °C

Product details

It is built to IEC 60947-3 and carries a suitability-for-isolation mark, meaning it can safely break a circuit and keep it visibly open for lockout/tagout. Its headline rating is 1000 A in utilisation category AC-23A at 440 V AC — that is the motor-switching and mixed-load curve. For a cement plant or heavy panel, this is the number that decides whether the switch holds on a loaded conveyor start or a crusher inrush.

Fault handling and duty cycle

Rated short-time withstand current (Icw) is 50 kA for 1 second at 220–440 V, and the rated short-circuit making capacity (Icm) is 75 kA at the same voltage range. These are the values a site electrical engineer needs for selectivity studies and SCCR coordination downstream of a transformer or generator. Electrical durability in AC-23A is 5000 cycles without maintenance; mechanical durability is 20000 cycles with maintenance, 10000 without.

Drawout mounting on a rail base plate — the switch pulls out for inspection or replacement without disturbing the main bus connections. Connection pitch is 70 mm without a spreader, and connections are rear-located, vertical or horizontal. IP30 protection means it is sealed against tools and wires over 2.5 mm diameter but not against dust ingress. In a cement plant environment, that means it belongs in a clean-ish MCC or panel room, not out on the raw-mill floor. Impulse withstand voltage is 12 kV.

MPN
ENW13280