Skip to main content
Schneider Electric ENW24278

Schneider Electric ENW24278 EasyPact NW Switch Disconnector,

MPN ENW24278
Active

Schneider Electric EasyPact NW, switch disconnector, ENW24278, 1000 A AC-23A, 4 poles, drawout, right neutral, IP40, IEC 60947-3.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ENW24278 key specifications
ParameterValue
Control typePush-button
Main product or component typeSwitch disconnector
Voltage690 V AC 50/60 Hz conforming to IEC 60947-3
Insulation voltage ui1000 V AC 50/60 Hz conforming to IEC 60947-3
CurrentAC-23 A: 1000 A AC 50/60 Hz 690 V
Utilization categoryAC-23 A
IP ratingIP40
Terminal pitch115 mm without spreader
Temp storage max85 °C
Temp storage min-40 °C
Temp operating max70 °C
Temp operating min-5 °C

All specifications

ENW24278 additional specifications
ParameterValue
Storage temperature-40...85 °C without control unit
Pollution degree4 conforming to IEC 60664-1
Depth395 mm
Width556 mm
Height439 mm
Mechanical life cycles20000 cycles with maintenance conforming to IEC 60947-3 10000 cycles without maintenance conforming to IEC 60947-3
ApplicationDistribution
Operating temperature-5...70 °C

Product details

Switch disconnector for distribution, 1000 A continuous

The Schneider Electric ENW24278 is a 4-pole switch disconnector from the EasyPact NW range, rated 1000 A in AC-23A utilisation category at 690 V AC. Rated for continuous duty, this unit handles motor switching (AC-23A includes frequent starting and stopping of motors) and general load-break duties. The 1000 A rating at 690 V means it can switch high-power loads directly — think large pumps, compressors, or feeder circuits — without derating for the voltage step. The drawout mounting (withdrawal chassis) lets you rack the disconnector out for safe maintenance without disturbing the rear-connected power cables — a standard requirement in switchboard and MCC lineups where panel access is tight.

Fault ratings and withstand

Short-time withstand current (Icw) is 66 kA for 1 second and 36 kA for 3 seconds, both at rated operating temperature. The short-circuit making capacity (Icm) is 143 kA peak at 50/60 Hz. These numbers tell you the switch can close onto a fault and hold through a delayed upstream breaker trip — critical for selective coordination in a distribution board.

Physical integration and environment

Dimensions: 556 mm wide, 439 mm high, 395 mm deep. The rear connection pitch is 115 mm without spreader. It mounts on a rail in a drawout cradle — plan for the full depth when sizing the enclosure depth, especially with rear cable exit. Neutral is on the right side (fixed position). Connection is vertical/horizontal at the rear. The contact position indicator is visible on the front — a green/red flag that shows open/closed state without needing to open the door.

MPN
ENW24278