Skip to main content
Schneider Electric GC2510B5

Schneider TeSys GC2510B5 Modular Contactor, 24 VAC, 1P, 25 A

MPN GC2510B5
Obsolete

Schneider Electric TeSys GC series, modular contactor GC2510B5, 1-pole, 24 V AC 50 Hz coil, 25 A rated, DIN rail clip-on.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

GC2510B5 key specifications
ParameterValue
Control typeRemote control
Control circuit typeAC at 50 Hz
Main product or component typeModular contactor
Voltage<= 250 V AC
Coil voltage24 V AC 50 Hz
Insulation voltage ui500 V conforming to IEC 61095 500 V conforming to VDE 0110
Current25 A AC-7 A 8.5 A AC-7B
Breaking capacity68 A at 400 V for power circuit conforming to IEC 61095
Utilization categoryAC-7 A AC-7B
Temp storage max70 °C
Temp storage min-40 °C
Temp operating max50 °C

All specifications

GC2510B5 additional specifications
ParameterValue
Temp operating min-5 °C
Storage temperature-40...70 °C
ColorWhite
Depth62.5 mm
Width17.5 mm
Height81 mm
Electrical life cyclesAC-7 A: 100000 cycles AC-7B: 100000 cycles
Mechanical life cycles1000000 cycles
ApplicationHeating Motor control Lighting
Operating time10...25 ms opening 10...30 ms closing
Operating position30°/vertical
Operating temperature-5...50 °C

Product details

The GC2510B5 is a 1-pole modular contactor from the Schneider TeSys GC series, designed for switching resistive and moderate inductive loads in control panels. Rated for AC-7A (heating, lighting) and AC-7B (motor control) duty, the 25 A thermal current (Ith) covers most small-panel loads like contactor coils, indicator lamps, and fractional-horsepower motors.

Control voltage and coil behaviour

The coil is 24 V AC at 50 Hz, with a pickup range of 0.85 to 1.1 Uc and dropout between 0.2 and 0.75 Uc. That dropout margin is generous — the contactor stays pulled in through a 20 % voltage sag, which is useful on a line with a big motor starting nearby. Inrush is 15 VA at 20 °C; holding dissipation is 1.3 W. If your PLC output drives an AC coil, factor the inrush into the output card's per-channel VA budget. Operate time is 10 to 25 ms opening and 10 to 30 ms closing — fast enough for most sequencing, but not for a safety-rated stop where you need a forced-guided contact block. The mechanical durability of 1,000,000 cycles and electrical durability of 100,000 cycles at AC-7A/AC-7B put it in the standard 'fit-and-forget' range for a panel contactor.

Clip-on DIN rail mounting, 17.5 mm wide, 81 mm tall, 62.5 mm deep. Screw-clamp terminals on both power and control circuits; torque to 0.8 N·m. Power circuit accepts up to 6 mm² flexible with or without ferrule; control circuit takes up to 2.5 mm². The 1-pole layout means line and load connect to the same terminal pair — straightforward for a single-phase switched load. IP20 protection on the body (finger-safe), IP40 when installed in an enclosure per VDE 0106. The white colour is standard for TeSys GC — easy to spot on a rail. Operating altitude up to 3000 m, so it works in high-altitude plants without derating.

MPN
GC2510B5