Skip to main content
Schneider Electric GC2520E5

GC2520E5 TeSys GC25 Modular Contactor, 2P, 48 V AC, 25 A

MPN GC2520E5
Obsolete

Schneider Electric TeSys GC GC25 modular contactor, 2 poles, 48 V AC 50 Hz control, 25 A rated, clip-on DIN rail mount, set of 12.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

GC2520E5 key specifications
ParameterValue
Control typeRemote control
Control circuit typeAC at 50 Hz
Main product or component typeModular contactor
Voltage<= 250 V AC
Coil voltage48 V AC 50 Hz
Insulation voltage ui500 V conforming to IEC 61095 500 V conforming to VDE 0110
Current25 A AC-7 A 8.5 A AC-7B
Breaking capacity68 A at 400 V for power circuit conforming to IEC 61095
Utilization categoryAC-7 A AC-7B
Temp storage max70 °C
Temp storage min-40 °C
Temp operating max50 °C

All specifications

GC2520E5 additional specifications
ParameterValue
Temp operating min-5 °C
Storage temperature-40...70 °C
ColorWhite
Depth62.5 mm
Width17.5 mm
Height81 mm
Electrical life cyclesAC-7 A: 100000 cycles AC-7B: 100000 cycles
Mechanical life cycles1000000 cycles
ApplicationLighting Motor control Heating
Operating time10...25 ms opening 10...30 ms closing
Operating position30°/vertical
Operating temperature-5...50 °C

Product details

The GC2520E5 is a TeSys GC modular contactor — a 2-pole, 25 A rated device with a 48 V AC 50 Hz coil, designed for clip-on mounting on a DIN rail inside a control panel. It's part of the GC25 family, sold as a set of 12, and intended for lighting, motor control, and heating loads under utilisation categories AC-7A and AC-7B. The 25 A gL fuse recommendation for the power circuit at ≤440 V gives you a straightforward coordination point for branch protection. Coil dropout happens between 0.2 and 0.75 Uc at 50 Hz; pickup is 0.85 to 1.1 Uc at <50 °C.

Clip-on onto a DIN rail, occupies a single 18 mm module width. Screw-clamp terminals on both power and control circuits; tighten to 0.8 N.m. Power circuit accepts up to 6 mm² flexible or solid, control circuit up to 2.5 mm². IP20 finger-safe with VDE 0106 out of the box; IP40 once inside the enclosure. Operating position allows up to 30° from vertical — fine for most panel layouts, but avoid upside-down mounting on a swing frame.

The AC-7A and AC-7B categories under IEC 61095 cover motor loads up to 25 A and resistive/inductive lighting or heating. Electrical durability is rated at 100,000 cycles for both categories — that's roughly 10 years of daily cycling on a lighting contactor. Mechanical durability hits 1,000,000 cycles, so the wear-out mode is contact erosion, not the mechanism. Heat dissipation is 1.3 W at 50/60 Hz coil excitation, plus 1.6 W per pole under load.

MPN
GC2520E5