Skip to main content
Schneider Electric ILM0701P02A0000

Schneider Electric ILM0701P02A0000 Servo Motor, 0.5 N·m

MPN ILM0701P02A0000
Active

Schneider Electric, PacDrive 3 series, ILM family servo motor integrated drive, 0.5 N·m nominal torque, 3.5 N·m peak, 6000 rpm, IP54, Hiperface absolute multiturn feedback.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

ILM0701P02A0000 specifications
ParameterValue
Feedback typeAbsolute multiturn SinCos Hiperface
Shaft end typeUntapped
Main product or component typeServo motor integrated drive
IP ratingIP54
Length8.3 in (212 mm)
Shaft diameter0.4 in (11 mm)
Max axial force fa n0.2 x Fr
Centring collar diameter2.4 in (60 mm)

Product details

Where the ILM0701P02A0000 sits in the PacDrive 3 stack

The ILM0701P02A0000 is a servo motor integrated drive in the ILM family of the PacDrive 3 range, with a 70 mm flange and 212 mm body length that puts it in the compact end of the line — sized for machines where the move profile demands fast acceleration more than high continuous torque. It pairs with a PacDrive 3 controller over the Hiperface absolute multiturn SinCos feedback link, so the drive resolves position from 128 periods per turn without a homing routine on every power-up.

Torque and speed envelope — what the motor actually delivers

Peak stall torque of 3.5 N·m and a maximum Irms of 5.7 A set the acceleration ceiling; the 310 W nominal output power and 6-pole, single-stack construction show this is a high-acceleration / low-continuous-duty axis, not a direct-drive replacement for a gearmotor. Torque constant is 0.71 N·m/A at 120 °C and the back-EMF constant is 46 V/krpm at 20 °C — the two scale together, so a drive sized for the nominal current also sees a bus-regen voltage that stays inside a 600 V-class DC link at top speed.

Electrical constants — sizing the drive loop

Stator resistance is 10.4 Ω phase-to-phase at 20 °C, dropping to 7.23 Ω phase-to-neutral at 120 °C; stator inductance is 38.8 mH at 20 °C and 19.4 mH at 120 °C, both phase-to-neutral — the inductance halving with temperature is the figure the current loop bandwidth calculation actually wants, not the cold number.

Shaft, flange, and mounting — what fits where

The shaft is 11 mm diameter, 23 mm long, untapped, with an 18 mm keyway and no second shaft end — the gearbox or pinion mounts directly on the keyed stub, with no threads to chase for a retention screw. Flange mounting is the international standard pattern on a 70 mm flange with a 60 mm centring collar and four 5.5 mm mounting holes; maximum radial load is 660 N at 1000 rpm, falling on a published curve to 360 N at 6000 rpm, with maximum axial force capped at 0.2 × Fr — so the belt tension or pinion mesh force needs to be checked against the speed-dependent Fr table, not against the headline number. Cooling is natural convection and sealing is IP54 — meaning the body tolerates dust and splashing water but not washdown, so it mounts inside a cabinet or on a covered machine section rather than in an open food-and-bev cell. No holding brake is fitted, so any vertical axis needs a brake added at the gearbox or as a separate option; the motor ships one per carton.

MPN
ILM0701P02A0000