Skip to main content
Schneider Electric LX1D2FE7

TeSys LX1D2FE7 Contactor Coil, 115 V AC, Obsolete

MPN LX1D2FE7
Active

Schneider Electric TeSys D contactor coil, LX1D2FE7, 115 V AC 50/60 Hz, for 9..18 A contactors, obsolete.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX1D2FE7 specifications
ParameterValue
Control circuit typeAC at 50/60 Hz
Main product or component typeContactor coil
Coil voltage115 V AC 50/60 Hz

Product details

The LX1D2FE7 is a replacement coil for TeSys D contactors in the 9–18 A frame — the LX1D2 variant. It pulls 70 VA inrush at 50/60 Hz (cos φ 0.75) and holds at 8 VA (cos φ 0.3), both at 20 °C. Coil voltage is 115 V AC 50/60 Hz, with an operating band of 0.8 to 1.1 Uc below 55 °C. No built-in suppressor module, so you'll want an external RC snubber or varistor across the coil if the PLC output driving it is solid-state.

This coil is marked obsolete by Schneider Electric. If you're kitting a spare for an existing panel, confirm the coil footprint and mounting match the LX1D2 armature before committing; the 115 V AC variant is common enough that a cross-reference exists in the aftermarket, but there's no single direct-replacement part number from Schneider.

Mounts directly onto the TeSys D contactor magnet assembly — no DIN-rail space consumed beyond the contactor itself. The coil terminals accept the same quick-connect tabs as the contactor coil socket. If you're swapping a failed coil in a live panel, kill the control transformer first; the 70 VA inrush can weld a relay contact if the supply is hot-dropped.

MPN
LX1D2FE7