Skip to main content
Schneider Electric LX1D2P5

Schneider LX1D2P5 TeSys D Contactor Coil, 230 V AC 50 Hz, Ob

MPN LX1D2P5
Obsolete

Schneider Electric TeSys D, LX1D2P5 contactor coil, 230 V AC 50 Hz, for 9 to 18 A contactors.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX1D2P5 specifications
ParameterValue
Control circuit typeAC 50 Hz
Main product or component typeContactor coil
Coil voltage230 V AC 50 Hz

Product details

The Schneider Electric LX1D2P5 is a replacement contactor coil from the TeSys D range, part of the LX1D2 device family. It is designed for 230 V AC 50 Hz control circuits and mates with 9 to 18 A TeSys D contactors. The coil draws 60 VA inrush at 50 Hz (cos φ 0.75) and holds at 7 VA (cos φ 0.3), both measured at 68 °F (20 °C). The closed-circuit inductance is 25 H, and the average DC resistance is 649.7 Ω at the same temperature. Operational voltage limits are 0.8 to 1.1 Uc at 50 Hz, up to 131 °F (55 °C). The coil has no built-in suppressor module — an external RC snubber or varistor should be added across the coil terminals if driving from a PLC output or electronic controller.

What to verify before ordering

This coil is AC 50 Hz only — it will not hold in on a 60 Hz supply or DC control voltage. The 230 V rating is nominal; the 0.8 to 1.1 Uc operating range means it drops out below roughly 184 V and may overheat above 253 V. Because the coil lacks a built-in suppressor, any inductive kickback when de-energizing must be managed externally. A standard RC snubber (0.1 µF + 100 Ω) across the coil terminals protects nearby electronics and extends contactor life.

MPN
LX1D2P5