Skip to main content
Schneider Electric LX1D4M6

Schneider LX1D4M6 TeSys D Contactor Coil, 220 VAC 60 Hz

MPN LX1D4M6
Obsolete

Schneider Electric TeSys D contactor coil, LX1D4M6, 220 V AC 60 Hz control circuit voltage, replacement coil for D-range contactors.

$65.76 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX1D4M6 specifications
ParameterValue
Main product or component typeContactor coil
Coil voltage220 V AC 60 Hz

Product details

The LX1D4M6 is a replacement contactor coil from the Schneider Electric TeSys range, designed to power the electromagnet in a D-frame contactor. It is not a standalone contactor but the coil assembly that gets swapped when the original fails or the control voltage needs changing.

Sourcing an obsolete TeSys coil

Availability is limited to new-old-stock or surplus inventory held by independent distributors. Sourcing this part requires a search of the surplus channel; quantities are lot-specific and confirmed at the time of RFQ. There is no official pin-compatible successor listed by Schneider for this specific coil voltage and frequency combination. For a BOM that requires this exact order code, the procurement path is through a distributor who can locate and quote the remaining stock.

What the category tells you about fit

The category classification '22341-CONTACTOR,D,K,&F ACCESS' confirms this coil is an accessory for the TeSys D, K, and F contactor frames. This is not a universal coil — it is mechanically and electrically specific to those frame sizes. The LX1D4 short name indicates the coil platform, which mates with the contactor's magnetic circuit. When replacing a coil in a panel, the mounting is a simple clip-on or screw-retained swap onto the contactor's yoke. No DIN rail removal or rewiring of the power circuit is needed, but the control wiring to the coil terminals (A1-A2) must be verified for polarity if the coil is electronically suppressed.

MPN
LX1D4M6