The LX1D4M6 is a replacement contactor coil from the Schneider Electric TeSys range, designed to power the electromagnet in a D-frame contactor. It is not a standalone contactor but the coil assembly that gets swapped when the original fails or the control voltage needs changing.
Sourcing an obsolete TeSys coil
Availability is limited to new-old-stock or surplus inventory held by independent distributors. Sourcing this part requires a search of the surplus channel; quantities are lot-specific and confirmed at the time of RFQ. There is no official pin-compatible successor listed by Schneider for this specific coil voltage and frequency combination. For a BOM that requires this exact order code, the procurement path is through a distributor who can locate and quote the remaining stock.
What the category tells you about fit
The category classification '22341-CONTACTOR,D,K,&F ACCESS' confirms this coil is an accessory for the TeSys D, K, and F contactor frames. This is not a universal coil — it is mechanically and electrically specific to those frame sizes. The LX1D4 short name indicates the coil platform, which mates with the contactor's magnetic circuit. When replacing a coil in a panel, the mounting is a simple clip-on or screw-retained swap onto the contactor's yoke. No DIN rail removal or rewiring of the power circuit is needed, but the control wiring to the coil terminals (A1-A2) must be verified for polarity if the coil is electronically suppressed.