Skip to main content
Schneider Electric LX1D4Q5

Schneider LX1D4Q5 TeSys D Contactor Coil, 380 V AC 50 Hz

MPN LX1D4Q5
Active

Schneider Electric TeSys D LX1D4Q5 contactor coil, 380 V AC 50 Hz, 90 VA inrush, 7.5 VA hold-in, AC control circuit.

$76.49 – $86.84 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX1D4Q5 specifications
ParameterValue
Coil typeAC 50 Hz
Control circuit typeAC
Main product or component typeContactor coil
Coil voltage380 V AC 50 Hz

Product details

380 V AC 50 Hz coil for TeSys D contactors

The LX1D4Q5 is a replacement contactor coil from the Schneider TeSys D range, wound for 380 V AC 50 Hz control circuits. It is the service part for the contactor frame, not the full contactor assembly — the coil swaps into the existing TeSys D magnet stack. Inrush power is 90 VA at 50 Hz; once the contactor seals, the hold-in power drops to 7.5 VA. The control circuit voltage limits are 0.8...1.1 Uc at up to 55 °C, so a 380 V coil stays pulled in down to about 304 V and up to 418 V at the coil terminals.

Obsolete — sourcing through independent channels

Schneider has marked the LX1D4Q5 as obsolete. Available through independent surplus and new-old-stock channels. Quantities are lot-specific; availability and pricing are confirmed at RFQ against the BOM line. No stock-holding claim is made here — each request is quoted individually.

What fits — panel and contactor compatibility

This coil is the AC 50 Hz variant for the TeSys D contactor frame. The 380 V AC rating matches European 400 V line-to-line control circuits derived from a 400/230 V distribution system. The AC coil type means it operates on sinusoidal control voltage, not DC or rectified AC. The coil mounts directly onto the TeSys D contactor magnet assembly — no adapter or bracket needed. The inrush-to-hold power ratio (90 VA to 7.5 VA) is typical for AC-operated contactor coils; the control transformer supplying the circuit must be sized for the inrush peak, not the steady-state hold-in figure.

MPN
LX1D4Q5