Skip to main content
Schneider Electric LX4FK065

TeSys LX4FK065 Contactor Coil, 125 V DC, Active

MPN LX4FK065
Active

Schneider Electric TeSys F LX4FK065, contactor coil, 125 V DC, 45...60 ms opening, 50...60 ms closing, without built-in suppressor module.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX4FK065 specifications
ParameterValue
Control circuit typeDC standard
Main product or component typeContactor coil
Coil voltage125 V DC
Temp operating max55 °C
Temp operating min-5 °C
Mechanical life cycles0.5 Mcycles
Operating time45...60 ms opening 50...60 ms closing
Operating temperature23...131 °F (-5...55 °C)

Product details

The LX4FK065 is a replacement contactor coil from the Schneider Electric TeSys F range, designed for LX1FK contactors. It operates on a 125 V DC control circuit and is the service part you order when the original coil fails or a panel spec changes voltage.

Key electrical characteristics

The coil pulls in at 2100 W inrush at 20 °C, then holds at 10 W — the inrush resistance is 3.73 Ohm, holding resistance 916 Ohm. That wide ratio means the DC supply must deliver the inrush peak without droop; a marginal power supply can cause chatter on pickup. Control voltage limits are 0.85...1.1 Uc for operation and 0.2...0.35 Uc for drop-out at 55 °C. So at 125 V DC nominal, the coil drops out between 25 V and 44 V — useful to know if you have a long DC run with voltage drop. The closed-circuit inductance is 122 H, which combined with the holding resistance gives the low holding power. No built-in suppressor module is included, so you need an external flyback diode or RC snubber across the coil to protect the DC control circuit from the inductive kick.

Mechanical and thermal limits

The ambient temperature range for operation is -5 to 55 °C. These are the limits that govern replacement intervals in high-cycle applications like packaging or conveyor sortation. Opening time is 45...60 ms, closing time 50...60 ms. That timing matters when coordinating with upstream protection or sequencing multiple contactors in a motor control center.

MPN
LX4FK065