Skip to main content
Schneider Electric LX4FK090

TeSys LX4FK090 contactor coil, 90 V DC, active

MPN LX4FK090
Obsolete

Schneider Electric TeSys LX4FK090 contactor coil, 90 V DC, FK series, active lifecycle.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX4FK090 specifications
ParameterValue
Control circuit typeDC low consumption
Main product or component typeContactor coil
Coil voltage90 V DC
Temp operating max55 °C
Temp operating min-5 °C
Operating time45...60 ms opening 50...60 ms closing
Operating temperature23...131 °F (-5...55 °C)

Product details

The LX4FK090 is a replacement contactor coil for the TeSys FK series — a DC low-consumption coil pulling in at 90 V DC nominal. It's the part you swap when the coil on a FK contactor opens or the control voltage drops out; no built-in suppressor module, so plan for an external flyback diode or RC snubber across the coil terminals if your PLC output or relay can't handle the inductive kick.

Operating time runs 45 to 60 ms on opening and 50 to 60 ms on closing — that's standard for a DC coil this size, but if your safety circuit demands faster break, this won't meet a sub-30 ms window. The holding resistance sits at 1917 ohms at 20 °C, with an inrush resistance of 7.47 ohms at the same temperature; that inrush-to-hold ratio means the coil draws a healthy surge on pickup, so size your 90 V DC supply to handle the momentary load without dropping below the 0.85 Uc operational limit. Drop-out threshold is 0.2 to 0.35 Uc at 55 °C — roughly 18 to 31.5 V DC — so the contactor stays in during a brownout down to about a third of nominal.

MPN
LX4FK090