Skip to main content
Schneider Electric MH30701P16A2200

Schneider Electric MH30701P16A2200 Servo Motor, 930 W

MPN MH30701P16A2200
Obsolete

Schneider Electric MH3 series, MH30701P16A2200 servo motor, 930 W continuous power, 1.38 Nm nominal torque, 1250 rpm, single-turn SinCos Hiperface encoder, IP65, 70 mm flange, without holding brake.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

MH30701P16A2200 specifications
ParameterValue
Encoder typeSingle turn SinCos Hiperface
Shaft end typeParallel key
Main product or component typeServo motor
IP ratingIP65
Length4.8 in (122 mm)
Shaft diameter0.4 in (11 mm)
Centring collar diameter2.4 in (60 mm)

Product details

Frame and electrical fit — 70 mm flange, 122 mm body

The MH30701P16A2200 is a 70 mm flange-size servo motor with a 122 mm body length — this frame class typically mates with Lexium 52 or 62 drive families across a range of supply voltages. Rated for three-phase supply, the motor delivers 930 W continuous power with a nominal torque of 1.38 N.m at 1250 rpm when paired with an LXM52 or LXM62 drive at 115 V three-phase. The single-turn SinCos Hiperface encoder provides absolute position feedback within one revolution — suitable for applications that need position hold at power-down without a multi-turn battery backup.

Torque and speed capability across the drive range

Nominal torque varies with the drive and supply: 1.38 N.m at 115 V three-phase with both LXM52 and LXM62 drives, dropping to 1.27 N.m at 480 V three-phase — the torque constant is 0.79 N.m/A at 120 °C copper temperature. Peak stall torque reaches 4.2 N.m across the 115–480 V three-phase range, giving a 3:1 overload margin over the continuous stall torque of 1.4 N.m — useful for acceleration transients and breakaway loads. Maximum mechanical speed is 8000 rpm, though nominal speeds are drive-limited to 1250–7000 rpm depending on the supply voltage and drive model selected.

Mechanical interface and environmental sealing

The shaft is 11 mm diameter with a parallel key and 23 mm shaft length — the centring collar is 60 mm diameter with a 2.5 mm depth, and four 5.5 mm mounting holes on the 70 mm flange bolt circle. IP65 rating means the housing is dust-tight and protected against low-pressure water jets — suitable for washdown areas in food processing or machining coolant splash zones, but not for submersion or high-pressure spray. Maximum radial force at the shaft nose is 660 N at 1000 rpm, derating to 360 N at 6000 rpm — belt-drive or direct-coupling designs must respect this envelope to avoid bearing overload.

Sourcing status — active production, quoted per BOM

No stock-holding claim is made here.

MPN
MH30701P16A2200