Skip to main content
Schneider Electric SH30401P07F2100

Schneider Electric SH30401P07F2100 Servo Motor with Brake

MPN SH30401P07F2100
Active

Schneider Electric SH3 series servo motor with brake, SH30401P07F2100, 170 W continuous power, 0.4 N.m holding torque, IP65, absolute multiturn SinCos Hiperface encoder, smooth shaft 8 mm diameter.

$1,328.94 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

SH30401P07F2100 specifications
ParameterValue
Encoder typeAbsolute multiturn SinCos Hiperface
Shaft end typeSmooth shaft
Main product or component typeServo motor
Length99.4 mm
Shaft diameter8 mm
Centring collar diameter30 mm

Product details

Motor specs that decide the fit

The SH30401P07F2100 is a 40 mm flange-size servo motor from the SH3 family, rated 170 W continuous power with natural convection cooling — no external fan needed, which simplifies panel layout and reduces noise in clean-room or lab environments. Nominal speed depends on the supply: 4000 rpm on single-phase 115 V or 230 V, and 9000 rpm on three-phase 400 V or 480 V. That means the same motor covers both low-speed positioning and high-speed spindle work, but the drive must match the voltage to hit the target rpm. Torque output also shifts with voltage — 0.176 N.m nominal on single-phase, 0.184 N.m on three-phase. Continuous stall torque is 0.21 N.m across the three-phase range, with a peak stall torque of 0.75 N.m at 480 V for short-duration acceleration or overload events.

Brake and encoder — what they mean on the line

The holding brake is built in, rated 0.4 N.m holding torque. That holds the load on a vertical axis or conveyor stop without power to the motor — essential for safety in a Z-axis or palletizer application where a coasting load would drop. Encoder is an absolute multiturn SinCos Hiperface type with 16 periods per revolution speed feedback resolution. Absolute multiturn means the drive knows the shaft position on power-up without a homing cycle — saves time on multi-axis machines after a power loss.

Mounting and environmental sealing

Mounts on an international standard flange with 40 mm square pattern, four 4.5 mm holes, and a 30 mm centring collar with 2.5 mm depth. The smooth 8 mm shaft extends 25 mm — no keyway, so the coupling or pulley must be clamped or use a set-screw hub. IP65 rating on both the motor body and the shaft bushing per IEC 60034-5 — sealed against dust ingress and low-pressure water jets. Electrical connection is a rotatable right-angle connector — lets the cable exit in the direction that fits the cable tray or drag chain without adding a separate right-angle adapter.

No stock-holding claim — quoted per RFQ.

MPN
SH30401P07F2100