Skip to main content
Schneider Electric FCE200524B200

Schneider Electric FCE200524B200 Cable Assembly, 10.7 in

MPN FCE200524B200
Active

Schneider Electric FCE200524B200 cable assembly, three phase, 10.7 in (270.7 mm) length, stripped ends, for Lexium servo motors.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

FCE200524B200 specifications
ParameterValue
Encoder typeAbsolute multiturn SinCos Hiperface
Shaft end typeSmooth shaft
Main product or component typeServo motor
Frequency8 kHz
Length10.7 in (270.7 mm)
Shaft diameter0.6 in (14 mm)
Max axial force fa n80 N
Max radial force fr n400 N 6000 rpm
Centring collar diameter2.4 in (60 mm)

Product details

Lexium servo motor cable — three-phase power and feedback in one assembly

The FCE200524B200 is a factory-terminated cable assembly for Schneider Electric's Lexium SHS servo motor series, combining three-phase power conductors with an absolute multiturn SinCos Hiperface encoder feedback pair in a single jacket. Rated for 970 W continuous output at 6000 rpm nominal speed, it mates motors delivering 1.55 Nm nominal torque and 4.65 Nm holding torque — sized for the SC005H2301 reference.

Length, termination, and environmental sealing

The 10.7 in (270.7 mm) fixed-length cable terminates in stripped ends at the drive side — field-wired into the Lexium drive connector or a junction box, not pre-molded. The motor end carries IP69K protection (conforming to IEC 60034-5) for high-pressure washdown environments, with IP67 as the baseline — suitable for food-and-bev lines or outdoor installations where hose-down cleaning is routine.

Performance specs that govern the load match

Peak stall torque reaches 10.3 Nm at 15.2 A peak current (LXM62/LXM52 drives at 400 V three-phase), while continuous stall torque is 2.5 Nm — the thermal limit under natural convection cooling. Stator resistance of 2.7 Ohm and inductance of 13 mH define the winding time constant; the 8 kHz switching frequency of the mating drive must be compatible with the cable's capacitance to avoid reflected-wave voltage spikes on long runs. The 14 mm smooth shaft with a 6 mm keyway and 40 mm shaft length fits standard Lexium motor flanges (100 mm flange size, 2.5 mm centring collar depth).

MPN
FCE200524B200