Lexium servo motor cable — three-phase power and feedback in one assembly
The FCE200524B200 is a factory-terminated cable assembly for Schneider Electric's Lexium SHS servo motor series, combining three-phase power conductors with an absolute multiturn SinCos Hiperface encoder feedback pair in a single jacket. Rated for 970 W continuous output at 6000 rpm nominal speed, it mates motors delivering 1.55 Nm nominal torque and 4.65 Nm holding torque — sized for the SC005H2301 reference.
Length, termination, and environmental sealing
The 10.7 in (270.7 mm) fixed-length cable terminates in stripped ends at the drive side — field-wired into the Lexium drive connector or a junction box, not pre-molded. The motor end carries IP69K protection (conforming to IEC 60034-5) for high-pressure washdown environments, with IP67 as the baseline — suitable for food-and-bev lines or outdoor installations where hose-down cleaning is routine.
Performance specs that govern the load match
Peak stall torque reaches 10.3 Nm at 15.2 A peak current (LXM62/LXM52 drives at 400 V three-phase), while continuous stall torque is 2.5 Nm — the thermal limit under natural convection cooling. Stator resistance of 2.7 Ohm and inductance of 13 mH define the winding time constant; the 8 kHz switching frequency of the mating drive must be compatible with the cable's capacitance to avoid reflected-wave voltage spikes on long runs. The 14 mm smooth shaft with a 6 mm keyway and 40 mm shaft length fits standard Lexium motor flanges (100 mm flange size, 2.5 mm centring collar depth).