Skip to main content
Schneider Electric LC1G115KUEN

Schneider LC1G115KUEN TeSys Giga contactor, 3-pole, 250 A, 250 V coil

MPN LC1G115KUEN
Active

Schneider LC1G115KUEN Iec Contactors 66 Over Amp.

$833.51 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LC1G115KUEN key specifications
ParameterValue
Main product or component typeContactor
Voltage<= 460 V DC
Coil voltage100...250 V AC 50/60 Hz 100...250 V DC
Insulation voltage ui1000 V
Current250 A (at 115 A (at <140 °F (60 °C)) at <= 440 V AC-3
Breaking capacity1040 A at 440 V
Utilization categoryAC-1 AC-3 AC-3e AC-4 AC-5 a AC-5b AC-6 a AC-6b AC-8 a AC-8b DC-1 DC-3 DC-5
Terminal pitch1.4 in (35 mm)
Temp storage max80 °C
Temp storage min-60 °C
Temp operating max60 °C
Temp operating min-25 °C

All specifications

LC1G115KUEN additional specifications
ParameterValue
Storage temperature-76...176 °F (-60...80 °C)
ColorDark grey
Depth7.6 in (193 mm)
Width4.3 in (108 mm)
Height7.6 in (193 mm)
Mechanical life cycles8 Mcycles
ApplicationPower switching Motor control
Operating time40...70 ms closing 15...50 ms opening
Operating temperature-13...140 °F (-25...60 °C)
Permissible ambient air temperature around the device-40...158 °F (-40...70 °C) at Uc

Product details

Overview

The LC1G115KUEN is a 3-pole IEC contactor from the Schneider TeSys Giga range, rated for 250 A switching current on a 460 V supply. The coil pulls in at 250 V AC and uses built-in bidirectional peak limiting to suppress switching transients without external suppression modules. It carries 1 NO + 1 NC auxiliary contacts and is certified to EN/IEC 60947-4-1, UL 60947-4-1, and CSA C22.2 No 60947-4-1, covering global panel approvals.

Sizing and selection

The 250 A switching current and 1.04 kA breaking capacity place the LC1G115KUEN at the lower end of the TeSys Giga frame. For a BOM that originally specified the LC1G225EHEA (330 A switching, 2.05 kA breaking), the LC1G115KUEN will not drop in without rewiring — the terminal pitch is 35 mm on both, but the LC1G225EHEA draws 8.9 W holding power versus 12.4 W for the LC1G115KUEN, and the coil voltage differs. Verify the control circuit and load current before substituting.

The LC1G115KUEN is an active TeSys Giga catalog part. Lead time is quoted per RFQ; no end-of-life notice is published as of the latest Schneider lifecycle data.

MPN
LC1G115KUEN