Skip to main content
Schneider Electric LX1FG850

TeSys LX1FG850 Contactor Coil, 1000 V AC 60 Hz, Obsolete

MPN LX1FG850
Active

TeSys F, contactor coil, LX1FG850, 1000 V AC 60 Hz, 18-24 W heat dissipation, 10 Mcycles mechanical durability.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX1FG850 specifications
ParameterValue
Control circuit typeAC 60 Hz
Main product or component typeContactor coil
Coil voltage1000 V AC 60 Hz
Temp operating max55 °C
Temp operating min-5 °C
Mechanical life cycles10 Mcycles
Operating time20...35 ms closing 7...15 ms opening
Operating temperature23...131 °F (-5...55 °C)

Product details

The LX1FG850 is a TeSys F contactor coil — the solenoid that pulls in the main power contacts on a TeSys F contactor. It's rated for 1000 V AC 60 Hz control circuits, with an inrush of 970 VA at 60 Hz and a hold-in draw of 66 VA. Operating time runs 20 to 35 ms closing, 7 to 15 ms opening.

The 1000 V AC 60 Hz control voltage is specific — this isn't a 24 VDC or 120 V coil. It's built for high-voltage AC control schemes, common in older or heavy industrial installations. The 18 to 24 W heat dissipation at 60 Hz means the coil generates noticeable heat; panel ventilation or spacing from heat-sensitive components matters. Drop-out voltage range is 0.35 to 0.55 Uc, operational range 0.85 to 1.1 Uc at 55 °C — so it holds in reliably down to 850 V AC and drops out below 550 V AC. That's a wide hysteresis, which helps prevent chatter on a sagging line.

Integration notes

This coil is a direct replacement for the TeSys F contactor range. No built-in suppressor module — if your circuit needs flyback suppression (and it should on a 1000 V AC coil driving an inductive load), you'll add an external RC snubber or varistor across the coil terminals. The average resistance is 249 ohms at 20 °C, inductance of the closed circuit is 36.6 H — that's a high inductance, so the flyback voltage spike on de-energization is substantial. Suppression isn't optional if you're switching it with a PLC output or a solid-state relay.

MPN
LX1FG850