Skip to main content
Schneider Electric MH30702P16F2200

Schneider Electric MH30702P16F2200 Servo Motor with Brake

MPN MH30702P16F2200
Obsolete

Schneider Electric MH30702P16F2200, MH3 series servo motor with brake, 1380 W continuous power, 1250 rpm nominal speed, 2.48 N·m continuous stall torque, IP65, single-turn SinCos Hiperface encoder, 70 mm flange.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

MH30702P16F2200 specifications
ParameterValue
Encoder typeSingle turn SinCos Hiperface
Shaft end typeParallel key
Main product or component typeServo motor
IP ratingIP65
Length7.6 in (193 mm)
Shaft diameter0.4 in (11 mm)
Centring collar diameter2.4 in (60 mm)

Product details

Torque and speed profile for load matching

The MH30702P16F2200: Rated 1380 W continuous power at 1250 rpm nominal speed, with a continuous stall torque of 2.48 N·m across the 115–480 V three-phase range — this is the holding torque the motor can sustain indefinitely without overheating, not the peak that clears a jam. Peak stall torque reaches 7.4 N·m at 115–480 V three-phase, giving a 3:1 torque overload margin for acceleration transients or short-duration overload events common in indexing and pick-and-place cycles. Nominal torque varies with supply voltage: 2.37 N·m at 115 V three-phase, 2.23 N·m at 230 V single-phase, 2.01 N·m at 400 V three-phase, and 1.89 N·m at 480 V three-phase — the torque derating above 115 V reflects the drive's current limit, not the motor's thermal capability.

Encoder, brake, and environmental sealing

Single-turn SinCos Hiperface encoder provides absolute position within one revolution — no homing sequence needed on power-up for rotary applications, but multi-turn position is lost if the drive loses power and the motor rotates. Integrated holding brake rated 3 N·m holding torque, with 7 W pull-in power — the brake engages when power is removed, holding the load on a vertical axis or during an E-stop; the 7 W coil power means a small 24 VDC supply can drive it without a separate brake rectifier. IP65 standard protection means the motor body is sealed against dust ingress and low-pressure water jets — suitable for washdown areas in food processing or machining coolant splash, but not for submersion or high-pressure spray (IP67 or IP69K would be needed for those).

Mechanical fit and shaft interface

70 mm flange (IEC standard) with a 60 mm centring collar and 5.5 mm mounting holes — bolts directly to a standard NEMA 70 or IEC 70 frame mount without adapter plates. 11 mm shaft diameter with a parallel key, 23 mm shaft length, and 4 mm key width — the key transmits torque to the load coupling; the 0.2 in (4 mm) key width means the keyway in the mating hub must be broached to that width, not a standard 5 mm metric key. Maximum radial force at the shaft centre drops from 710 N at 1000 rpm to 390 N at 6000 rpm — belt-driven loads must be sized against the operating speed's force limit, not the static rating, to avoid bearing overload.

Electrical parameters for drive tuning

Stator resistance 3.84 Ω and inductance 12.19 mH give an electrical time constant of about 3.2 ms — the drive's current loop bandwidth must be set below the pole frequency to avoid oscillation; typical Lexium 52/62 drives auto-tune this on commissioning. Back EMF constant 54.08 V/krpm means the motor generates 54 V phase-to-phase for every 1000 rpm of mechanical speed — at 1250 rpm nominal, the back EMF is about 67.6 V, leaving headroom for the drive's bus voltage to push current into the windings. Continuous stall current 2.94 A and maximum current 9.68 A — the drive's continuous current rating should match the 2.94 A stall current for thermal balance; the 9.68 A peak supports acceleration and deceleration transients within the drive's overload envelope.

MPN
MH30702P16F2200