Skip to main content
Schneider Electric MH30703P02F2200

Schneider Electric MH30703P02F2200 Servo Motor, 5000 rpm

MPN MH30703P02F2200
Obsolete

Schneider Electric MH30703P02F2200 servo motor with brake, MH3 series, 5000 rpm, 1540 W, 3.18 N.m nominal torque, IP65, Multiturn SinCos Hiperface encoder, smooth shaft, 70 mm flange.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

MH30703P02F2200 specifications
ParameterValue
Encoder typeMultiturn SinCos Hiperface
Shaft end typeSmooth shaft
Main product or component typeServo motor
IP ratingIP65
Length8.9 in (225 mm)
Shaft diameter0.6 in (14 mm)
Max radial force fr n730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm
Centring collar diameter2.4 in (60 mm)

Product details

5000 rpm servo with holding brake — MH30703P02F2200

The MH30703P02F2200 is a three-phase servo motor from Schneider Electric's MH3 series, rated for 5000 rpm nominal speed and 1540 W continuous power. It includes a holding brake with 3 N.m holding torque, making it suited for vertical-axis applications where the load must stay put when the drive is de-energized. The motor delivers 3.18 N.m nominal torque when paired with an LXM52 drive at 115 V three-phase, derating to 2.26 N.m at 480 V three-phase. Peak stall torque reaches 10.2 N.m for short-duration acceleration events.

Encoder feedback and cable routing

The Multiturn SinCos Hiperface encoder provides absolute position feedback — the drive knows the shaft position at power-up without a homing cycle. This saves cycle time on machines that power-cycle between batches. Rotatable right-angled connectors let the cable exit in any of four directions, which helps when the motor is mounted in a tight cabinet corner or against a machine frame. The smooth shaft (no keyway) means the coupling must transmit torque through a clamping or friction fit.

IP65 and thermal constraints

Rated IP65, the motor body and connector seal withstand washdown — suitable for food-and-beverage lines or wet machining areas. Cooling is by natural convection only; no fan, so the motor relies on the mounting surface and ambient airflow to stay within the 135 °C copper hot-spot limit. Maximum radial force on the shaft drops from 730 N at 1000 rpm to 400 N at 6000 rpm — bearing life is the constraint at higher speeds, so a belt-drive or overhung load must be sized against this derating curve.

The motor mates with LXM52 or LXM62 servo drives; nominal torque varies with the drive voltage configuration as listed in the spec table.

MPN
MH30703P02F2200