Skip to main content
Log in
Schneider Electric MH30703P02F2200 — Servo Motors with Brake

Schneider Electric MH30703P02F2200 Servo Motor, 5000 rpm

MPNMH30703P02F2200
Obsolete

Schneider Electric MH30703P02F2200 servo motor with brake, MH3 series, 5000 rpm, 1540 W, 3.18 N.m nominal torque, IP65, Multiturn SinCos Hiperface encoder, smooth shaft, 70 mm flange.

Schneider Electric MH30703P02F2200 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

MH30703P02F2200 — Identification
ParameterValue
Product typeServo motor
Holding brakeWith
MH30703P02F2200 — Performance
ParameterValue
Nominal torque28.15 lbf.in (3.18 N.m) LXM52 3.56 mA, 115 V, three phase 26.20 lbf.in (2.96 N.m) LXM52 3.47 mA, 230 V, single phase 22.39 lbf.in (2.53 N.m) LXM52 3.02 mA, 400 V, three phase 20.003 lbf.in (2.26 N.m) LXM52 2.74 mA, 480 V, three phase 28.15 lbf.in (3.18 N.m) LXM62 3.56 mA, 115 V, single phase 26.20 lbf.in (2.96 N.m) LXM62 3.47 mA, 230 V, single phase 22.39 lbf.in (2.53 N.m) LXM62 3.02 mA, 400 V, three phase 20.003 lbf.in (2.26 N.m) LXM62 2.74 mA, 480 V, three phase
Nominal output power0.42 W, 115 V 0.75 W, 230 V 1.32 W, 400 V 1.54 W, 480 V
Continuous power1540 W
Nominal speed5000 rpm
Maximum mechanical speed8000 rpm
Continuous stall torque30.09 lbf.in (3.4 N.m), 115...480 V, three phase
Peak stall torque90.3 lbf.in (10.2 N.m), 115...480 V, three phase
Holding brake torque26.6 lbf.in (3 N.m)
Rotor inertia1.78 kg.cm²
MH30703P02F2200 — Electrical
ParameterValue
Rated supply voltage (Us)115...480 V
PhaseThree phase
Maximum current (Irms)12.57 A
Continuous stall current3.91 A
Torque constant0.87 N.m/A 248 °F (120 °C)
Back-EMF constant55 V/krpm
Number of motor poles5.0
Stator resistance2.65 Ohm
Stator inductance8.64 mH
Stator electrical time constant3.2 ms
Electrical connectionRotatable right-angled connectors
MH30703P02F2200 — Feedback
ParameterValue
Encoder typeMultiturn SinCos Hiperface
Speed feedback resolution128 periods
MH30703P02F2200 — Mechanical
ParameterValue
Shaft end styleSmooth shaft
Shaft diameter0.6 in (14 mm)
Shaft length1.2 in (30 mm)
Second shaft endWithout second shaft end
Motor flange size2.8 in (70 mm)
Mounting supportInternational standard flange
Length8.9 in (225 mm)
Number of mounting holes4
Mounting-hole diameter0.2 in (5.5 mm)
Mounting-hole bolt circle diameter3.2 in (82 mm)
Centring collar diameter2.4 in (60 mm)
Centring collar depth0.10 in (2.5 mm)
Maximum radial force (Fr)730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm
MH30703P02F2200 — Environmental
ParameterValue
IP degree of protectionIP65 standard
Cooling methodNatural convection
Winding (copper hot) temperature275 °F (135 °C)

Product details

5000 rpm servo with holding brake — MH30703P02F2200

The MH30703P02F2200 is a three-phase servo motor from Schneider Electric's MH3 series, rated for 5000 rpm nominal speed and 1540 W continuous power. It includes a holding brake with 3 N.m holding torque, making it suited for vertical-axis applications where the load must stay put when the drive is de-energized. The motor delivers 3.18 N.m nominal torque when paired with an LXM52 drive at 115 V three-phase, derating to 2.26 N.m at 480 V three-phase. Peak stall torque reaches 10.2 N.m for short-duration acceleration events.

Encoder feedback and cable routing

The Multiturn SinCos Hiperface encoder provides absolute position feedback — the drive knows the shaft position at power-up without a homing cycle. This saves cycle time on machines that power-cycle between batches. Rotatable right-angled connectors let the cable exit in any of four directions, which helps when the motor is mounted in a tight cabinet corner or against a machine frame. The smooth shaft (no keyway) means the coupling must transmit torque through a clamping or friction fit.

IP65 and thermal constraints

Rated IP65, the motor body and connector seal withstand washdown — suitable for food-and-beverage lines or wet machining areas. Cooling is by natural convection only; no fan, so the motor relies on the mounting surface and ambient airflow to stay within the 135 °C copper hot-spot limit. Maximum radial force on the shaft drops from 730 N at 1000 rpm to 400 N at 6000 rpm — bearing life is the constraint at higher speeds, so a belt-drive or overhung load must be sized against this derating curve.

The motor mates with LXM52 or LXM62 servo drives; nominal torque varies with the drive voltage configuration as listed in the spec table.

Frequently asked questions

What is the nominal torque of MH30703P02F2200 at different voltages?

Nominal torque is 3.18 N.m with an LXM52 drive at 115 V three-phase, 2.96 N.m at 230 V single-phase, 2.53 N.m at 400 V three-phase, and 2.26 N.m at 480 V three-phase. Peak stall torque is 10.2 N.m across the voltage range.

What encoder type does MH30703P02F2200 use?

It uses a Multiturn SinCos Hiperface encoder, which provides absolute position feedback — no homing sequence needed after power-up.

How can I order MH30703P02F2200 and check availability?

Submit an RFQ for current pricing and availability confirmation.

MPN
MH30703P02F2200