Skip to main content
Schneider Electric XS1 N05PA311S

Telemecanique XS1 N05PA311S Inductive Sensor, M8, PNP

MPN XS1 N05PA311S

Telemecanique XS1 series M8 threaded inductive proximity sensor, shielded, PNP NO, 3-pin M8 connector, IP67, 303 stainless steel body, 1 mm sensing range.

$30.48 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

XS1 N05PA311S specifications
ParameterValue
SeriesXS1
Product typeInductive Sensor
Sensing typeInductive
Terminal typeM8
Output circuit typePNP
Contact formno
IP ratingIP67
Enclosure materialStainless Steel
MountingDirect Connector
Pin count3
Wire count3
Sensing distance1 mm
Temp operating max158 °F
Height42 mm
Sensor diameterM8 Threaded
Sensor body styleCylindrical

Product details

The Telemecanique XS1 N05PA311S is an M8-threaded cylindrical inductive proximity sensor in the XS1 series, shielded face, PNP normally-open output, terminated on a 3-pin M8 direct connector, sealed to IP67. Body is 303 stainless steel with an overall length of 42 mm — the stainless shell is what pulls this into food-and-beverance and washdown-adjacent zones where mild-steel sensors would corrode.

Sensing range and the load it actually drives

Maximum sensing distance is 1 mm on a shielded M8 body — short by design, so target material, size, and approach speed decide whether the sensor reliably trips in the application rather than the headline range alone. PNP NO 3-wire output and built-in overload and short-circuit protection let it wire straight into a standard sourcing PLC input card without an inline resistor or protection module. Operating temperature spans up to 158 °F, which keeps the part usable inside cabinets next to VFDs and in warm panel rooms without further derating.

Approvals and compliance markings

The sensor carries CE, CSA, and UL Listed markings on the spec sheet — these are the compliance codes a maintenance planner will look for when the device lands on a panel build sheet.

An indicator light is included in the body, which is the on-target visual cue a line operator needs when a small M8 sensor is buried in a fixture and not visible from the panel.

Cross-reference to the catalog variant

The MPN XS1N05PA311S corresponds to the same M8 shielded, PNP NO, IP67 part with a 1 mm sensing distance. A panel specified against either string drops in without rewiring the input card.

MPN
XS1 N05PA311S