The Telemecanique XS1 N05PA311S is an M8-threaded cylindrical inductive proximity sensor in the XS1 series, shielded face, PNP normally-open output, terminated on a 3-pin M8 direct connector, sealed to IP67. Body is 303 stainless steel with an overall length of 42 mm — the stainless shell is what pulls this into food-and-beverance and washdown-adjacent zones where mild-steel sensors would corrode.
Sensing range and the load it actually drives
Maximum sensing distance is 1 mm on a shielded M8 body — short by design, so target material, size, and approach speed decide whether the sensor reliably trips in the application rather than the headline range alone. PNP NO 3-wire output and built-in overload and short-circuit protection let it wire straight into a standard sourcing PLC input card without an inline resistor or protection module. Operating temperature spans up to 158 °F, which keeps the part usable inside cabinets next to VFDs and in warm panel rooms without further derating.
Approvals and compliance markings
The sensor carries CE, CSA, and UL Listed markings on the spec sheet — these are the compliance codes a maintenance planner will look for when the device lands on a panel build sheet.
An indicator light is included in the body, which is the on-target visual cue a line operator needs when a small M8 sensor is buried in a fixture and not visible from the panel.
Cross-reference to the catalog variant
The MPN XS1N05PA311S corresponds to the same M8 shielded, PNP NO, IP67 part with a 1 mm sensing distance. A panel specified against either string drops in without rewiring the input card.
