Skip to main content
Schneider Electric A9C62416

Schneider Electric A9C62416 Reflex iC60N, 16A 4P C-Curve MCB

MPN A9C62416
Active

Schneider Electric Acti9 Reflex iC60N, A9C62416, integrated control MCB, 16 A, 4P, curve C, thermal-magnetic, 20 kA breaking capacity.

$345.24 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9C62416 specifications
ParameterValue
Trip unit typeThermal-magnetic
Main product or component typeIntegrated control circuit breaker
Coil voltage230 V AC 50/60 Hz 24 V AC 50/60 Hz 48 V AC 50/60 Hz 24 V DC 48 V DC
Insulation voltage ui500 V AC
Breaking capacity20 kA Icu at 220...240 V AC 50/60 Hz conforming to EN/IEC 60947-2 10 kA Icu at 380...415 V AC 50/60 Hz conforming to EN/IEC 60947-2
IP ratingIP20
Pollution degree3
ColorWhite
Depth77 mm
Width117 mm
Height84 mm
Electrical life cyclesAC-1: 50000 cycles AC 50 Hz
Mechanical life cycles50000 cycles
ApplicationControl Distribution

Product details

It combines overcurrent protection (MCB function) with local and remote switching control in a single 4-pole unit rated at 16 A with a C trip curve. The thermal-magnetic trip unit handles overloads and short-circuits, while the control section accepts multiple signal types: impulse (pulse), maintained (continuous command), and maintained very low voltage, all at 230 V AC, 24 V AC/DC, or 48 V AC/DC control voltages.

Breaking capacity is 20 kA Icu at 220...240 V AC and 10 kA Icu at 380...415 V AC, per EN/IEC 60947-2. At 16 A rated current, it fits a 16 A feeder or a group of loads summing to that figure. Electrical durability is 50,000 cycles under AC-1 (resistive) load at 50 Hz, with matching mechanical durability. That's a solid service life for a switching device that will see daily on/off cycles from remote commands or local toggle operation.

Control and integration

At 13 x 9 mm pitches (117 mm wide for 4 poles), it occupies four modular spaces. The fixed mounting mode means it stays put once snapped onto the rail. Control options include a local toggle ON/OFF button, remote control by pulse (impulse), remote control by continuous command (maintained), and a maintained very low voltage signal. This flexibility lets an integrator wire it for momentary pushbutton control from a PLC digital output, or for sustained signal from a safety relay or manual switch. Local signalling uses a multi-colour LED: green for ON, flashing for tripped or ready or overheat, red for fault. The contact position indicator gives a visual confirmation of the main contact state independent of the LED. IP20 protection means it's touch-safe but not sealed against moisture — standard for indoor panel installation. Earth-leakage protection requires a separate block (Vigi or similar), not integrated.

MPN
A9C62416