Skip to main content
Schneider Electric LX1FH0522

TeSys LX1FH0522 Contactor Coil, 52 V AC 40-400 Hz

MPN LX1FH0522
Active

Schneider Electric TeSys LX1FH0522, contactor coil, 52 V AC 40-400 Hz, 8 W dissipation, without built-in suppressor module.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

LX1FH0522 specifications
ParameterValue
Control circuit typeAC 40...400 Hz
Main product or component typeContactor coil
Coil voltage52 V AC 40...400 Hz
Temp operating max55 °C
Temp operating min-5 °C
Operating time100...170 ms opening 40...65 ms closing
Operating temperature23...131 °F (-5...55 °C)

Product details

The LX1FH0522 is a replacement contactor coil from the TeSys range, designed for LX1F contactors. It operates on 52 V AC at 40 to 400 Hz, drawing 8 W of heat dissipation. The coil has no built-in suppressor module, so you'll need to add external suppression (RC snubber or varistor) across the coil terminals if driving it from a PLC output or electronic controller — the lack of internal suppression means the coil's inductive kickback is unmanaged without it.

Control circuit voltage is 52 V AC, with a dropout threshold of 0.35 to 0.55 Uc (roughly 18 to 29 V) and a pickup range of 0.85 to 1.1 Uc (44 to 57 V) at 55 °C. That means the coil will reliably pull in above about 44 V and drop out below about 29 V — important if your control transformer sags under load or you're running a long cable run. Opening time is 100 to 170 ms, closing time 40 to 65 ms; the maximum operating rate is 2400 cycles per hour at 55 °C, which is fine for most motor starting and switching duty but not for high-speed cycling applications like rapid reversing.

MPN
LX1FH0522