Skip to main content
Schneider Electric A9C52263

Schneider Electric A9C52263 Reflex iC60N 63A 2P C-curve MCB

MPN A9C52263
Obsolete

Schneider Electric Acti9 Reflex iC60N, integrated control circuit breaker, 63 A, 2P, curve C, 20 kA breaking capacity at 230 V AC.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

A9C52263 specifications
ParameterValue
Trip unit typeThermal-magnetic
Control signal typeImpulse Maintained
Main product or component typeIntegrated control circuit breaker
Coil voltage230 V AC 50/60 Hz 24 V AC 50/60 Hz 48 V AC 50/60 Hz 24 V DC 48 V DC
Insulation voltage ui500 V AC
IP ratingIP20
Pollution degree3
ColorWhite
Depth77 mm
Width81 mm
Height84 mm
Electrical life cyclesAC-1: 50000 cycles AC 50 Hz
Mechanical life cycles50000 cycles
ApplicationControl Distribution

Product details

The control circuit accepts multiple voltages: 230 V AC, 24 V AC, 48 V AC, 24 V DC, or 48 V DC, selectable by the control signal type (impulse or maintained). This means a single part number covers both pulse-trip and continuous-command schemes without stocking separate coils.

Breaking capacity is 20 kA Icu at 220–240 V AC and 10 kA Icu at 380–415 V AC, both per EN/IEC 60947-2. At 230 V the 20 kA headroom covers higher-fault locations near the service entrance.

Fixed mounting on 35 mm DIN rail. The 2-pole footprint occupies 9 module pitches (81 mm width). IP20 finger-safe terminals per IEC 60529. Local signalling includes a flashing LED for device ready, overheat, and tripped states, plus a red LED for fault and green for device ON — useful for panel walk-down diagnostics without a separate indicator bank.

MPN
A9C52263